ONORM M 7305-1986 Cylindrical furnaces under external pressure design testing《外压圆筒炉 设计，测试》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESW-M2D230-A3-2010 ELASTOMER POLYESTER MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚酯弹性体成型料 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD ESW-M2D230-A1上》.pdf

FORD ESW-M2D230-A4-2010 ELASTOMER POLYESTER MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚酯弹性体成型料 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD ESW-M2D230-A1上》.pdf

FORD ESW-M2D234-A-2010 POLYURETHANE MOLDING COMPOUND MODIFIED - POLYETHER BASED TO BE USED WITH FORD WSS-M99P1111-A 《聚醚基改性聚氨酯成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESW-M2D234-B-2010 POLYURETHANE MOLDING COMPOUND MODIFIED - POLYETHER BASED TO BE USED WITH FORD WSS-M99P1111-A 《聚醚基改性聚氨酯成型料 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD ESW-M2D234-.pdf

FORD ESW-M2D234-C-2010 POLYURETHANE MOLDING COMPOUND MODIFIED - POLYETHER BASED TO BE USED WITH FORD WSS-M99P1111-A 《聚醚基改性聚氨酯成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESW-M2D247-A-2009 NITRILE BUTADIENE RUBBER HIGH HEAT RESISTANT - OIL SEALS TO BE USED WITH FORD WSS-M99P1111-A 《油封圈用耐高温丁腈橡胶 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESW-M2D248-B-2009 LAMINATE MODIFIED BUTYL RUBBER POLYESTER FABRIC TO BE USED WITH FORD WSS-M99P1111-A 《改性丁基橡胶 聚酯织物层压板 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESW-M2D250-A-2009 NITRILE BUTADIENE RUBBER LOW TEMPERATURE RESISTANT - OIL SEAL TO BE USED WITH FORD WSS-M99P1111-A 《油封圈用耐低温丁腈橡胶 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESW-M2D251-A-2009 LAMINATE SILICONE RUBBER POLYESTER FABRIC - INSULATOR TO BE USED WITH FORD WSS-M99P1111-A 《绝缘体用硅橡胶 聚酯织物层压板 与标准FORD WSS-M99P1111-A一起使用 》.pdf