ONORM M 7315-1989 Supports for horizontal pressure vessels design《水平压力容器支撑 设计》.pdf

相关资源

JIS G3115-2005 中温设备压力容器用钢板.pdf

JIS G3116-2005 压力容器用钢薄板、板及钢带.pdf

JIS G3119-2007 锅炉和压力容器用锰-钼和锰-钼-镍合金钢厚板材, G3119, JISG3119..pdf

JIS G3126-2004 低温压力容器用碳素钢板.pdf

JIS G3127-1990 低温压力容器用镍钢板 英文版.pdf

JIS G3127-2005 低温压力容器用镍钢板.pdf

JIS G3214-1991 英文版 压力容器用不锈钢锻件.pdf

JIS G3214-2009 压力容器用不锈钢锻件(修改单1).pdf

JIS B8279-1993 中文版 压力容器的夹套.pdf

JIS G3103 2007 锅炉和压力容器中的碳素钢和钼合金钢板.pdf

猜你喜欢

STAS SR CEI 1017-1-1995 Portable transportable or installed X or gamma radiation ratemeters for environmental monitoring Part 1 Ratemeters《用于环境监测的便携式、可运输或安装的X或γ辐射计数率计 第1部分：计数率计 》.pdf

STAS SR CEI 1018-1995 High range beta and photon dose and dose rate portable instruments for emerpency radiation protection purposes《突发辐射保护用途的高距离测试和光子剂量和剂量率的便携式仪器 》.pdf

STAS SR CEI 1094-1-1993 Measurement microphones Part 1 Specifications for laboratory standard microphones《测量麦克风 第1部分：实验室标准麦克风的规格 》.pdf

STAS SR CEI 1128+A1-1995 Alternating currentdisconnectors Bus - transfer current switching by disconnectors《交流电连接器 总线传输电流隔离开关 》.pdf

STAS SR CEI 1153-1995 Electrical and pneumatic analogue chart recorders for use in industrial-process control systems-Guidance for inspection and routine testing《工业过程控制系统用的电动和气动模拟图.pdf

STAS SR CEI 317-16-1995 Specifications for particular types of winding wires Part 16 Poliester enamelled rectangular copper wire class 155《特定类型绕组线规格 第16部分：聚酯漆包矩形铜线155级 》.pdf

STAS SR CEI 321+A1-1995 Guidance for the design and use of components intended for mounting on boards with printed wiring and printed circuits《加入装备印制布线和印制电路电路板元件的设计和使用指南 》.pdf

STAS SR CEI 335-2-31-1993 Safety of household and similar electrical appiiances Part 2 Particular requirements for range hoods《家用电器及类似电器的安全 第2部分：抽油烟机的特殊要求 》.pdf

STAS SR CEI 344-1995 Guide to the calculation of resistance of plain and coated copper conductors of low - frequency cables and wires《低频电缆和电线所用平板和涂层铜导体电阻的估算指南 》.pdf