ONORM M 8102-1998 Lists of spare parts《备件清单》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NBN-EN 287-2-1992 8125 《焊工合格证 熔化焊接 第2部分：铝及铝合金》.pdf

NBN-EN 28733-1992 1250 Parallel pins with internal thread unhardened《未淬硬钢制有内螺纹的平行销》.pdf

NBN-EN 28734-1992 1250 Parallel pins hardened (Dowel pins)《淬硬钢的平行销》.pdf

NBN-EN 28735-1992 3125 Parallel pins with internal thread hardened《淬硬钢制有内螺纹的平行销》.pdf

NBN-EN 28736-1992 6250 Taper pins with internal thread unhardened《未淬硬内螺纹锥销》.pdf

NBN-EN 28737-1992 6250 Taper pins with external thread unhardened《未淬硬外螺纹锥销》.pdf

NBN-EN 28738-1992 9375 Plain washers for clevis pins - Product grade A《U形销的平垫圈 A级产品》.pdf

NBN-EN 28739-1992 1875 Grooved pins - Full-length parallel grooved with pilot《带槽销 带导向的全长直槽型销》.pdf

NBN-EN 28740-1992 8750 Grooved pins - Full-length parallel grooved with chamfer《带槽销 有倒角的全长直槽型销》.pdf