ONORM S 1393 Teil 67-1987 Rimmed rifle cartridge and Chamber caliber 350 No 2 Rigby《镶边步枪子弹和枪膛 口径 350 No 2 Rigby》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 22091 7-1984 X-ray devices The methods of the measuring of the uniformity of the distribution of the energe flyx density of the X-ray over the X-ray coverage《X射线仪 X射线辐射场能通量密度分.pdf

GOST 22091 8-1984 X-ray devices Method of measuring spectral structure and relative spectrum contamination《X射线仪 光谱成分和光谱相对污染程度测量方法》.pdf

GOST 22091 9-1986 X-ray devices The methods of measuring effective focus spot size《X射线仪 有效的焦点尺寸测量方法》.pdf

GOST 22092-1976 Polyamide fibres Method for determination of colour unevennessin《合成丝 染色不匀率的测定方法》.pdf

GOST 22096-1984 Automatic moulding lines Types basic parameters《铸型自动线 型式，基本参数》.pdf

GOST 22130-1986 Steel piping details Movable supports and hangers Specifications《钢管零件 活动支座和吊架 技术条件》.pdf

GOST 22133-1986 Paint coatings of metal-cutting press-forging foundry and wood-working equipment General requirements《金属切削、锻压、铸造和木材加工机器的油漆涂层 一般要求》.pdf

GOST 22159-1976 Reagents Hydrazine dihydrochloride Specifications《盐酸肼 技术条件》.pdf

GOST 22160-1976 Two layer domes of organic plastic Specifications《有机玻璃制双层圆顶罩 技术条件》.pdf