ONORM S 1517-1999 Metallic slide fasteners (zippers) - Types dimensions materials《金属滑动紧固件（拉链）类型；尺寸；材料》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 13FTM08-2013 Application and Improvement of Face Load Factor Determination Based on AGMA 927.pdf

AGMA 13FTM09-2013 Investigations on Tooth Root Bending Strength of Case Hardened Gears in the Range of High Cycle Fatigue.pdf

AGMA 13FTM10-2013 Calculation of the Tooth Root Load Carrying Capacity of Beveloid Gears.pdf

AGMA 13FTM11-2013 Striving for High Load Capacity and Low Noise Excitation in Gear Design.pdf

AGMA 13FTM12-2013 Practical Considerations for the Use of Double Flank Testing for the Manufacturing Control of Gearing.pdf

AGMA 13FTM13-2013 Gear Failure Analysis and Lessons Learned in Aircraft High-Lift Actuation.pdf

AGMA 13FTM14-2013 Metallurgical Investigation of Tiger Stripes on a Carburized High Speed Pinion.pdf

AGMA 13FTM15-2013 White Structure Flaking in Rolling Bearings for Wind Turbine Gearboxes.pdf

AGMA 13FTM16-2013 The Anatomy of a Lubrication Erosion Failure - Causation Initiation Progression and Prevention.pdf