ONORM S 1760-1988 Testing of colour fastness of textiles determination of colour fastness of dyeings and prints to dryheat《纺织品色牢度的测试 耐干热染色和印花色牢度的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E398-2003(2009)e1 516 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement《用动态相对湿度测量法测定薄板材料中水蒸气透过率的标准试验方法》.pdf

ASTM E398-2013 red 6823 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement《用动态相对湿度测量测定薄片材料的水蒸气透过率的标准试验方法》.pdf

ASTM E399-2006e1 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials《金属材料的线性弹性平面变形断裂韧度KIc的标准试验方法》.pdf

ASTM E399-2006e2 780 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials.pdf

ASTM E399-2008 488 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials.pdf

ASTM E399-2009 6250 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials.pdf

ASTM E399-2009e1 8125 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials《金属材料的线性弹性平面变形断裂韧度KIc用标准试验方法》.pdf

ASTM E399-2009e2 5625 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness Ic of Metallic Materials《金属材料的线性弹性平面变形断裂韧度KIc用标准试验方法》.pdf

ASTM E399-2012 red 3125 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials《测定Klc金属材料的线性-弹性平面应变破裂韧性的标准试验方法》.pdf