ONORM S 4628 Teil 2-1979 Gymnastic equipment Multi purpose parallel bars《体操设备 多用途双杠》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 25912-2015 Prestressed reinforced concrete slabs for aerodrome pavement Specifications《机场铺面用钢筋混凝土预应力平板 规格》.pdf

GOST 25915-1988 Forging machines and rolls Series of main parameters《锻压机和辊锻机 主要参数系列》.pdf

GOST 25917-1983 Lasers Methods for measurement of relative distribution of radiant energy (power)《激光器 辐射能量（功率）密度相对分布的测量方法》.pdf

GOST 25918-1983 Continuous-wave lasers Methods for measurement of radiation frequency instability《连续工作的激光器 辐射频率不稳定性的测量方法》.pdf

GOST 25919-1983 Sheet stamping dies Die sets with intermediate plate with four guide sliding assemblies Design and dimensions《板材冲压模 具有四个滑动导向部件的带中间板的冲压模组件 结构及尺寸》.pdf

GOST 25920-1983 Sheet stamping dies Intermediate plates-blanks for dies with four guide sliding assemblies Design and dimensions《板材冲压用模 具有四个滑动导向部件的冲压模用中间板一坯 结构及尺寸》.pdf

GOST 25921-1983 Paper tape for graphic devices of computers Specifications《计算机图示设备用纸带 技术条件》.pdf

GOST 25922-1983 Electrical insulating materials Determination of stiffness Methods of test《绝缘材料 硬度测定法》.pdf

GOST 25923-1989 Butterfly control valves Basic parameters《盘式调节阀 基本参数》.pdf