PS 113-1960 PAKISTAN STANDARD SPECIFICATION FOR READYMIXED PAINTS VARNISH LACQUER AND RELATED PRODUCTS 《巴基斯坦标准 预拌油漆、清漆及相关产品规范》.pdf

相关资源

PS 372-1963 PAKISTAN STANDARD SPECIFICATION FOR SHOTI STRACH AND GLUCOSE STARCH《巴基斯坦标准 绍提（SHOTI）淀粉和葡萄糖淀粉规范》.pdf

PS 373-1963 PAKISTAN STANDARD SPECIFICATION FOR ARROWROOT STARCH AND GLUCOSE STARCH《巴基斯坦标准 木薯淀粉和葡萄糖淀粉规范》.pdf

PS 381-1964 PAKISTAN STANDARD SPECIFICATION FOR MAIDA《巴基斯坦标准 MAIDA规范》.pdf

PS 382-1964 PAKISTAN STANDARD SPECIFICATION FOR BREAD《巴基斯坦标准 面包规范》.pdf

PS 384-1964 PAKISTAN STANDARD SPECIFICATION FOR MACRQNI SPAGHETTI VERMICELLI (SEMAI OR SEVYYAN) AND NOODLES《巴基斯坦标准 通心粉、意大利空心粉（SEMAI或SEVYYAN）和面条规范》.pdf

PS 39-1958 PAKISTAN STANDARD METHODS OF TESTING FASTNESS OF DYES ON TEXTILES TO SOAP WASHING《巴基斯坦标准 用肥皂冲洗来测试纺织品上的染料的稳定性的试验方法》.pdf

PS 41-1958 PAKISTAN STANDARD METHODS OF TESTING FASTNESS OF DYES ON TEXTILES TO BLEACHING WITH PEROXIDE《巴基斯坦标准 用过氧化氢漂白来测试纺织品上的染料的稳定性的试验方法》.pdf

PS 89-1960 PAKISTAN STANDARD SPECIFICATION FOR FLUID INK FOR REGISTRATION AND FOR CHEQUES AND RECORDS 《巴基斯坦标准 液体墨水注册；开支票；记录规范》.pdf

PS 91-1958 PAKISTAN STANDARD METHODS FOR DETERMINATION OF STARCH IN YARNS AND FABRICS《巴基斯坦标准 纱线和织品中浆粉的测定方法》.pdf

PS 92-1958 PAKISTAN STANDARD METHODS FOR REMOVAL OF ADDED MATTER FROM TEXTILES《巴基斯坦标准 纺织品中附着物的去除方法》.pdf

猜你喜欢

FORD WSS-M2D418-A3-2009 SILICONE (VMQ) RUBBER HIGH TEMPERATURE RESISTANT LONG LIFE GROMMET TO BE USED WITH FORD WSS-M99P1111-A 《长寿命垫环用耐高温硅酮（VMQ）橡胶 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M2D440-B3-2017 FLUOROELASTOMER (FKM) 70 C 75 IRHD HARDNESS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M2D451-B1-2008 HYDROGENATED NITRILE (HNBR) RUBBER 80 DUROMETER TO BE USED WITH FORD WSS-M99P1111-A 《硬度80的氢化丁腈橡胶（HNBR）橡胶 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M2D451-B2-2008 HYDROGENATED NITRILE (HNBR) RUBBER 70 DUROMETER TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M2D451-B1)《硬度70的氢化丁腈橡胶(HNBR) 与标准FORD WSS-M99P1111-A一起使用.pdf

FORD WSS-M2D451-B3-2016 HYDROGENATED NITRILE (HNBR) RUBBER HIGH TEMPERATURE COOLANT SEAL 70 DUROMETER A HARDNESS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M2D452-A4-2010 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《热塑性聚酯乙醚弹性体（TEEE）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M2D463-A2-2009 HYDROGENATED NITRILE BUTADIENE RUBBER (HNBR) SUPERIOR COMPRESSION SET REFRIGERANT AND OIL RESISTANT O-RINGS TO BE USED WITH FORD WSS-M99P1111-A (Shown on .pdf

FORD WSS-M2D470-A5-2004 DUCT EPDM LOW OIL SWELL MOLDED AIR INTAKE TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSE-M2D470-A1)《模制进气口用低油膨胀性三元乙丙橡胶(EPDM)管 与标准FORD WSS-M99P1111-A一起使.pdf

FORD WSS-M2D470-A5-2013 DUCT EPDM LOW OIL SWELL MOLDED AIR INTAKE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSE-M2D470-A1).pdf