PS 84-1960 Evalution of Moisture Content in Textile Materials《纺织材料含水率评定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS ISO 10789-2011 Space systems Programme management Information and documentation management《航天系统 计划管理 信息和文件管理》.pdf

BS ISO 10790-2015 Measurement of fluid flow in closed conduits Guidance to the selection installation and use of Coriolis flowmeters (mass flow density and volume flow measurements.pdf

BS ISO 10791-1-2015 Test conditions for machining centres Geometric tests for machines with horizontal spindle (horizontal Z-axis)《机加试验条件 带水平主轴(水平Z轴)机床的几何试验》.pdf

BS ISO 10791-10-2007 Test conditions for machining centres - Evaluation of thermal distortions《机械加工中心的试验条件 热变形的评定》.pdf

BS ISO 10791-2-2001 Test conditions for machining centres - Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis.pdf

BS ISO 10791-3-1999 Test conditions for machining centres - Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis)《加工中心检验条件 第3部分 分度或连续.pdf

BS ISO 10791-4-1998 Test conditions for machining centres - Accuracy and repeatability of positioning of linear and rotary axes《加工中心的试验条件 第4部分 线性和旋转轴定位的精度和可重复性》.pdf

BS ISO 10791-5-1998 Test conditions for machining centres - Accuracy and repeatability of positioning of work-holding pallets《加工中心的试验条件 第5部分 工件夹紧盘定位的精度和可重复性》.pdf

BS ISO 10791-7-2014 Test conditions for machining centres Accuracy of finished test pieces《机加中心的试验条件 成品试件的精度》.pdf