RTCA DO-303-2006 Safety Performance and Interoperability Requirements Document for the ADS-B Non-Radar-Airspace (NRA) Application.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JUS C A4 061-1985 Mechanical testing ofmetals DesignaH-on of testpiece axes《金属的机械测试 试样轴的标识方法》.pdf

JUS C A4 062-1987 Comarsion of elongation values tor carbon and low afloy steels《碳素钢和低合金钢伸长率换算》.pdf

JUS C A4 063-1987 Conversion of elongation values for austenitic steels《奥氏体钢的伸长率换算》.pdf

JUS C A4 064-1985 Mechanical testing of metals Tensile testing systems Determination of K-value《金属的机械测试 拉伸试验 测定K值》.pdf

JUS C A4 065-1987 Mechanical testing of metals Hardness conversions for steels《金属的机械测试 钢的硬度换算法》.pdf

JUS C A4 083-1995 Mechanical testing of metals - Elementary concepts and properties relating to fractrure testing《金属的机械试验 断裂韧性试验相关的基本概念和特性 n》.pdf

JUS C A4 084-1995 Mechanical testing of metals - Methods of tests for plane strain fracture toughness (K IC)《金属的机械测试 平面应变断裂韧性KIC试验方法》.pdf

JUS C A4 098-1995 Mechanical testing of metals - Tables of Vickers hardness values for use in tests made on flat surfaces - Less than HV 0 2《金属的机械试验 平面试验用维氏硬度值表-维氏硬度小于0 2》.pdf

JUS C A4 099-1995 Mechanical testing of metals - Calibration of standardized for verification of Vickers bardness testing machines less than HV 0 2《金属的机械试验 检验维氏硬度试验机（维氏硬度小于0 2）用标准硬.pdf