RTCA DO-369-2017 Guidance for the Usage of Data Linked Forecast and Current Wind Information in Air Traffic Management(ATM) Operations.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 16246-1970 Chill moulds Pushers Construction and dimension《金属铸型(硬模) 推出器 结构及尺寸》.pdf

GOST 16247-1970 Chill moulds Devices for push of castings Construction and dimensions《冷硬铸模 铸件推动装置 结构和尺寸规格》.pdf

GOST 16248-1970 Chill moulds Guide pins Construction and dimensions《冷硬铸模 导向销 结构和尺寸规格》.pdf

GOST 16249-1970 Chill moulds Fixator of metal cores Construction and dimensions《金属铸型(硬模) 金属型芯定位器 结构及尺寸》.pdf

GOST 16250-1970 Chill moulds Ventilation channels Dimensions《冷硬铸模 通风道 尺寸规格》.pdf

GOST 16251-1970 Chill moulds Ventilation rested stoppers Construction and dimensions《金属铸型(硬模) 止动通风塞 尺寸》.pdf

GOST 16252-1970 Chill moulds Ventilation passaged stoppers Construction and dimensions《冷硬铸模 通风道塞 结构和尺寸规格》.pdf

GOST 16253-1970 Chill moulds Screwed core removers Construction and dimensions《冷硬铸模 螺旋芯拆卸工具 结构和尺寸规格》.pdf

GOST 16254-1970 Chill moulds Core removers (eccentric cramps) Construction and dimensions《金属铸型(硬模) 脱型芯用夹具 偏心夹板 结构及尺寸》.pdf