SAE AMS 3778B-2012 Tape and Webbing Woven Nylon《尼龙编织带》.pdf

上传人:diecharacter305 文档编号:1021123 上传时间:2019-03-21 格式:PDF 页数:14 大小:3.33MB
下载 相关 举报
SAE AMS 3778B-2012 Tape and Webbing Woven Nylon《尼龙编织带》.pdf_第1页
第1页 / 共14页
SAE AMS 3778B-2012 Tape and Webbing Woven Nylon《尼龙编织带》.pdf_第2页
第2页 / 共14页
SAE AMS 3778B-2012 Tape and Webbing Woven Nylon《尼龙编织带》.pdf_第3页
第3页 / 共14页
SAE AMS 3778B-2012 Tape and Webbing Woven Nylon《尼龙编织带》.pdf_第4页
第4页 / 共14页
SAE AMS 3778B-2012 Tape and Webbing Woven Nylon《尼龙编织带》.pdf_第5页
第5页 / 共14页
点击查看更多>>
资源描述

1、 SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there

2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. Copyright 2012 SAE International All rights reserved. No part of this publication m

3、ay be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside U

4、SA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AMS3778BAEROSPACEMATERIALSPECIFICATIONAMS3778 REV. B Issued 1986-07 Revised 1990-10Stabilized

5、 2012-02 Superseding AMS3778A Tape and Webbing, Woven, Nylon RATIONALE This document has been determined to contain basic and stable technology which is not dynamic in nature. STABILIZED NOTICE This document has been declared “Stabilized“ by SAE AMS P, Polymeric Materials Committee, and will no long

6、er be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability of technical requirements. Newer technology may exist. Copyright SAE International Provided by IHS under license with SAENot for Resale-,-,-SAE AMS3778B Page 1 of 13 Copyright S

7、AE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHSSAE AMS3778B Page 2 of 13 Copyright SAE International Provided by IHS under license with SAENot for Resale-,-,-SAE AMS3778B Page 3 of 13 Copyright SAE International Pr

8、ovided by IHS under license with SAENot for Resale-,-,-SAE AMS3778B Page 4 of 13 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHSSAE AMS3778B Page 5 of 13 Copyright SAE International Provided by IHS under

9、 license with SAENot for Resale-,-,-SAE AMS3778B Page 6 of 13 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHSSAE AMS3778B Page 7 of 13 Copyright SAE International Provided by IHS under license with SAENo

10、t for Resale-,-,-SAE AMS3778B Page 8 of 13 Copyright SAE International Provided by IHS under license with SAENot for Resale-,-,-SAE AMS3778B Page 9 of 13 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHSSA

11、E AMS3778B Page 10 of 13 Copyright SAE International Provided by IHS under license with SAENot for Resale-,-,-SAE AMS3778B Page 11 of 13 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHSSAE AMS3778B Page 12 of 13 STABILIZED BY AMS COMMITTEE “P“ Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHSSAE AMS3778B Page 13 of 13 Copyright SAE International Provided by IHS under license with SAENot for Resale-,-,-

展开阅读全文
相关资源
猜你喜欢
  • BS EN 1097-1-2011 Tests for mechanical and physical properties of aggregates Determination of the resistance to wear (micro-Deval)《集料的机械和物理特性的试验 耐磨性的测定(微型-台佛尔)》.pdf BS EN 1097-1-2011 Tests for mechanical and physical properties of aggregates Determination of the resistance to wear (micro-Deval)《集料的机械和物理特性的试验 耐磨性的测定(微型-台佛尔)》.pdf
  • BS EN 1097-10-2014 Tests for mechanical and physical properties of aggregates Determination of water suction height《集料的机械和物理特性的试验 吸水高度的测定》.pdf BS EN 1097-10-2014 Tests for mechanical and physical properties of aggregates Determination of water suction height《集料的机械和物理特性的试验 吸水高度的测定》.pdf
  • BS EN 1097-11-2013 Tests for mechanical and physical properties of aggregates Determination of compressibility and confined compressive strength of lightweight aggregates《集料的机械和物理特.pdf BS EN 1097-11-2013 Tests for mechanical and physical properties of aggregates Determination of compressibility and confined compressive strength of lightweight aggregates《集料的机械和物理特.pdf
  • BS EN 1097-2-2010 Tests for mechanical and physical properties of aggregates - Methods for the determination of resistance to fragmentation《集料的机械和物理特性试验 抗碎裂性的测定方法》.pdf BS EN 1097-2-2010 Tests for mechanical and physical properties of aggregates - Methods for the determination of resistance to fragmentation《集料的机械和物理特性试验 抗碎裂性的测定方法》.pdf
  • BS EN 1097-3-1998 Tests for mechanical and physical properties of aggregates - Determination of loose bulk density and voids《集料的机械和物理特性试验 松散体积密度和空隙率的测定》.pdf BS EN 1097-3-1998 Tests for mechanical and physical properties of aggregates - Determination of loose bulk density and voids《集料的机械和物理特性试验 松散体积密度和空隙率的测定》.pdf
  • BS EN 1097-4-2008 Tests for mechanical and physical properties of aggregates - Part 4 Determination of the voids of dry compacted filler《集料的机械和物理性质试验 第4部分 干燥压实填充料空隙率的测定》.pdf BS EN 1097-4-2008 Tests for mechanical and physical properties of aggregates - Part 4 Determination of the voids of dry compacted filler《集料的机械和物理性质试验 第4部分 干燥压实填充料空隙率的测定》.pdf
  • BS EN 1097-5-2008 Tests for mechanical and physical properties of aggregates - Part 5 Determination of the water content by drying in a ventilated oven《集料的机械和物理特性试验 第5部分 用通风烘箱干燥法测定.pdf BS EN 1097-5-2008 Tests for mechanical and physical properties of aggregates - Part 5 Determination of the water content by drying in a ventilated oven《集料的机械和物理特性试验 第5部分 用通风烘箱干燥法测定.pdf
  • BS EN 1097-6-2013 Tests for mechanical and physical properties of aggregates Determination of particle density and water absorption《集料的机械和物理性能试验 颗粒密度和吸水性的测定》.pdf BS EN 1097-6-2013 Tests for mechanical and physical properties of aggregates Determination of particle density and water absorption《集料的机械和物理性能试验 颗粒密度和吸水性的测定》.pdf
  • BS EN 1097-7-2008 Tests for mechanical and physical properties of aggregates - Part 7 Determination of the particle ndensity of filler — Pyknometer method《集料的机械和物理性质的试验 第7部分 使用比重计法.pdf BS EN 1097-7-2008 Tests for mechanical and physical properties of aggregates - Part 7 Determination of the particle ndensity of filler — Pyknometer method《集料的机械和物理性质的试验 第7部分 使用比重计法.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1