1、 SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there
2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions. Copyright 2017 SAE International All rights reserved. No part of this p
3、ublication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-497
4、0 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/standards.sae.org/AMS4015L AEROSPACE MATERIAL SPECIFICATION AMS4015 REV. L Issued 1939-12 Revised 2007-02 Reaffir
5、med 2017-11 Superseding AMS4015K Aluminum Alloy, Sheet and Plate 2.5Mg - 0.25Cr (5052-0) Annealed (Composition similar to UNS A95052) RATIONALE AMS4015L has been reaffirmed to comply with the SAE Five-Year Review policy. SAE INTERNATIONAL AMS4015L Page 2 of 5_ SAE INTERNATIONAL AMS4015L Page 3 of 5_ SAE INTERNATIONAL AMS4015L Page 4 of 5_ SAE INTERNATIONAL AMS4015L Page 5 of 5_
