1、 SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there
2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. Copyright 2013 SAE International All rights reserved. No part of this publication m
3、ay be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside U
4、SA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AMS5564C AEROSPACE MATERIAL SPECIFICATION AMS5564 REV. C Issued 1985-07 Revised 2000-02 Reaff
5、irmed 2013-04 Superseding AMS5564B Steel, Corrosion Resistant, Tubing 19CR - 10Ni (SAE 30304) High-Pressure Hydraulic, Welded Plus Ultrasonically Tested or Seamless Cold Drawn, One Eighth - Hard Temper UNS S30400 RATIONALE AMS5564C has been reaffirmed to comply with the SAE five-year review policy. SAE AMS5564C Page 2 of 9 SAE AMS5564C Page 3 of 9 SAE AMS5564C Page 4 of 9 SAE AMS5564C Page 5 of 9 SAE AMS5564C Page 6 of 9 SAE AMS5564C Page 7 of 9 SAE AMS5564C Page 8 of 9 SAE AMS5564C Page 9 of 9
