1、_ SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there
2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions. Copyright 2013 SAE International All rights reserved. No part of this p
3、ublication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-497
4、0 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AMS5627G AEROSPACE MATERIAL SPECIFICATION AMS5627 REV. G Issued 1952-02 Revised 2
5、003-01 Reaffirmed 2013-07 Superseding AMS5627F Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgins, Tubing, and Rings 17Cr (SAE 51430) Annealed (Composition similar to UNS S43000) RATIONALE AMS5627G has been reaffirmed to comply with the SAE five-year review policy. SAE INTERNATIONAL AMS5627G Page 2 of 6 SAE INTERNATIONAL AMS5627G Page 3 of 6 SAE INTERNATIONAL AMS5627G Page 4 of 6 SAE INTERNATIONAL AMS5627G Page 5 of 6 SAE INTERNATIONAL AMS5627G Page 6 of 6
