1、_SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report isentirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefr
2、om, is the sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions.Copyright 2012 SAE InternationalAll rights reserved. No part of this publication may be
3、 reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)Tel: +1 724-776-4970 (outside USA)Fax:
4、 724-776-0790Email: CustomerServicesae.orgSAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedbackon this Technical Report, please visithttp:/www.sae.org/technical/standards/AMS5702DAEROSPACEMATERIALSPECIFICATIONAMS5702 REV. DIssued 1971-11Revised 2007-01Reaffirmed 2012-04Superse
5、ding AMS5702CNickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8TiConsumable Electrode Remelted or Vacuum Induction Melted1750 F (954 C) Solution Heat Treated(Composition similar to UNS N09706)RATIONALEAMS5702D has been reaffirmed to comply with the SAE five-year review policy.SAE AMS5702D Page 2 of 7SAE AMS5702D Page 3 of 7SAE AMS5702D Page 4 of 7SAE AMS5702D Page 5 of 7SAE AMS5702D Page 6 of 7SAE AMS5702D Page 7 of 7
