SAE AMS-R-83285A-2011 Rubber Ethylene-Propylene General Purpose《通用乙丙橡胶》.pdf

上传人:tireattitude366 文档编号:1022672 上传时间:2019-03-21 格式:PDF 页数:12 大小:3.18MB
下载 相关 举报
SAE AMS-R-83285A-2011 Rubber Ethylene-Propylene General Purpose《通用乙丙橡胶》.pdf_第1页
第1页 / 共12页
SAE AMS-R-83285A-2011 Rubber Ethylene-Propylene General Purpose《通用乙丙橡胶》.pdf_第2页
第2页 / 共12页
SAE AMS-R-83285A-2011 Rubber Ethylene-Propylene General Purpose《通用乙丙橡胶》.pdf_第3页
第3页 / 共12页
SAE AMS-R-83285A-2011 Rubber Ethylene-Propylene General Purpose《通用乙丙橡胶》.pdf_第4页
第4页 / 共12页
SAE AMS-R-83285A-2011 Rubber Ethylene-Propylene General Purpose《通用乙丙橡胶》.pdf_第5页
第5页 / 共12页
点击查看更多>>
资源描述

1、 SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there

2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. Copyright 2011 SAE International All rights reserved. No part of this publication m

3、ay be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside U

4、SA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AMSR83285AAEROSPACEMATERIALSPECIFICATIONAMS-R-83285 REV. A Issued 1998-03 Stabilized 2011-11

5、Superseding AMS-R-83285 Rubber, Ethylene-Propylene, General Purpose RATIONALE This document has been determined to contain basic and stable technology which is not dynamic in nature. STABILIZED NOTICE This document has been declared “Stabilized“ by SAE CE, Elastomers Committee, and will no longer be

6、 subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability of technical requirements. Newer technology may exist. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE AMS-R-83285A Page 2 of 12

7、 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE AMS-R-83285A Page 3 of 12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE AMS-R-83285A Page 4 of 12 Provided by IHSNot for ResaleNo reproductio

8、n or networking permitted without license from IHS-,-,-SAE AMS-R-83285A Page 5 of 12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE AMS-R-83285A Page 6 of 12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license fr

9、om IHS-,-,-SAE AMS-R-83285A Page 7 of 12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE AMS-R-83285A Page 8 of 12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE AMS-R-83285A Page 9 of 12 Pro

10、vided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE AMS-R-83285A Page 10 of 12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE AMS-R-83285A Page 11 of 12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE AMS-R-83285A Page 12 of 12 STABILIZED BY AMS COMMITTEE “CE“ Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
  • JIS K6395-2003 橡胶,乙丙橡胶二烯烃(EPDM)--试验方法.pdfJIS K6395-2003 橡胶,乙丙橡胶二烯烃(EPDM)--试验方法.pdf
  • STAS 8365 7-1982 Elastomeres TEST RECIPE FOR TESTING ETHYLENE-PROPYLENE-DIENE NON-OIL EXTENDED《弹性体 测试乙丙橡胶非油扩充的试验配方 》.pdfSTAS 8365 7-1982 Elastomeres TEST RECIPE FOR TESTING ETHYLENE-PROPYLENE-DIENE NON-OIL EXTENDED《弹性体 测试乙丙橡胶非油扩充的试验配方 》.pdf
  • AECMA PREN 2431-1994 Aerospace Series Ethylene-Propylene Rubber (EPM EPDM) Hardness 80 IRHD Edition 1《航空航天系列.乙丙橡胶(EPM EPDM) 硬度 80 IRHD.第1版》.pdfAECMA PREN 2431-1994 Aerospace Series Ethylene-Propylene Rubber (EPM EPDM) Hardness 80 IRHD Edition 1《航空航天系列.乙丙橡胶(EPM EPDM) 硬度 80 IRHD.第1版》.pdf
  • AECMA PREN 2432-1994 Aerospace Series Ethylene-Propylene Rubber (EPM EPDM) Hardness 90 IRHD Edition 1《航空航天系列.乙丙橡胶(EPM EPDM) 硬度 90 IRHD.第1版》.pdfAECMA PREN 2432-1994 Aerospace Series Ethylene-Propylene Rubber (EPM EPDM) Hardness 90 IRHD Edition 1《航空航天系列.乙丙橡胶(EPM EPDM) 硬度 90 IRHD.第1版》.pdf
  • AECMA PREN 2428-1994 Aerospace Series Ethylene-Propylene Rubber (EPM EPDM) Hardness 50 IRHD Edition 1《航空航天系列 乙丙橡胶(EPM EPDM) 硬度 50 IRHD.第1版》.pdfAECMA PREN 2428-1994 Aerospace Series Ethylene-Propylene Rubber (EPM EPDM) Hardness 50 IRHD Edition 1《航空航天系列 乙丙橡胶(EPM EPDM) 硬度 50 IRHD.第1版》.pdf
  • AECMA PREN 2429-1994 Aerospace Series Ethylene-Propylene Rubber (EPM EPDM) Hardness 60 IRHD Edition 1《航空航天系列.乙丙橡胶(EPM EPDM) 硬度60 IRHD.第1版》.pdfAECMA PREN 2429-1994 Aerospace Series Ethylene-Propylene Rubber (EPM EPDM) Hardness 60 IRHD Edition 1《航空航天系列.乙丙橡胶(EPM EPDM) 硬度60 IRHD.第1版》.pdf
  • BS EN 2430-1995 Ethylene-propylene rubber (EPM EPDM) - Hardness 70 IRHD《乙丙橡胶(EPM EPDM) 硬度 70 IRHD(国际橡胶硬度标度)》.pdfBS EN 2430-1995 Ethylene-propylene rubber (EPM EPDM) - Hardness 70 IRHD《乙丙橡胶(EPM EPDM) 硬度 70 IRHD(国际橡胶硬度标度)》.pdf
  • BS EN 2431-1995 Ethylene-propylene rubber (EPM EPDM) - Hardness 80 IRHD《乙丙橡胶(EPM EPDM) 硬度 80 IRHD(国际橡胶硬度标度)》.pdfBS EN 2431-1995 Ethylene-propylene rubber (EPM EPDM) - Hardness 80 IRHD《乙丙橡胶(EPM EPDM) 硬度 80 IRHD(国际橡胶硬度标度)》.pdf
  • BS EN 2432-1995 Ethylene-propylene rubber (EPM EPDM) - Hardness 90 IRHD《乙丙橡胶(EPM EPDM) 硬度 90 IRHD(国际橡胶硬度标度)》.pdfBS EN 2432-1995 Ethylene-propylene rubber (EPM EPDM) - Hardness 90 IRHD《乙丙橡胶(EPM EPDM) 硬度 90 IRHD(国际橡胶硬度标度)》.pdf
  • BS EN 2428-1995 Ethylene-propylene rubber (EPM EPDM) - Hardness 50 IRHD《乙丙橡胶(EPM EPDM) 硬度 50 IRHD(国际橡胶硬度标度)》.pdfBS EN 2428-1995 Ethylene-propylene rubber (EPM EPDM) - Hardness 50 IRHD《乙丙橡胶(EPM EPDM) 硬度 50 IRHD(国际橡胶硬度标度)》.pdf
  • 猜你喜欢
  • AECMA PREN 3523-1999 Aerospace Series Steel FE-PL1505 (15CrMoV6) Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 100 mm 1 080 MPa Less Than or Equal to .pdf AECMA PREN 3523-1999 Aerospace Series Steel FE-PL1505 (15CrMoV6) Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 100 mm 1 080 MPa Less Than or Equal to .pdf
  • AECMA PREN 3524-1999 Aerospace Series Steel FE-PL1505 (15CrMoV6) Air Melted Hardened and Tempered Sheet and Strip 2 mm Less Than or Equal to a Less Than or Equal to 6 mm 1 080 MPa .pdf AECMA PREN 3524-1999 Aerospace Series Steel FE-PL1505 (15CrMoV6) Air Melted Hardened and Tempered Sheet and Strip 2 mm Less Than or Equal to a Less Than or Equal to 6 mm 1 080 MPa .pdf
  • AECMA PREN 3525-1999 Aerospace Series Steel FE-PL1505 (15CrMoV6) Air Melted Hardened and Tempered Plate 6 mm Less Than or Equal to a Less Than or Equal to 20 mm 1 080 MPa Less Than航.pdf AECMA PREN 3525-1999 Aerospace Series Steel FE-PL1505 (15CrMoV6) Air Melted Hardened and Tempered Plate 6 mm Less Than or Equal to a Less Than or Equal to 20 mm 1 080 MPa Less Than航.pdf
  • AECMA PREN 3526-1999 Aerospace Series Steel FE-PL1505 (15CrMoV6) Air Melted Hardened and Tempered Sheet and Strip 0 5 mm Less Than or Equal to a Less Than or Equal to 6 mm 980 MPa t.pdf AECMA PREN 3526-1999 Aerospace Series Steel FE-PL1505 (15CrMoV6) Air Melted Hardened and Tempered Sheet and Strip 0 5 mm Less Than or Equal to a Less Than or Equal to 6 mm 980 MPa t.pdf
  • AECMA PREN 3527-1998 Aerospace Series Steel FE-PL1504 (33CrMoV12) Air Melted Softened Forging Stock a or D Less Than or Equal to 300 mm Edition P2《航空航天系列.钢 FE-PL1504(33CrMoV12) 空气熔.pdf AECMA PREN 3527-1998 Aerospace Series Steel FE-PL1504 (33CrMoV12) Air Melted Softened Forging Stock a or D Less Than or Equal to 300 mm Edition P2《航空航天系列.钢 FE-PL1504(33CrMoV12) 空气熔.pdf
  • AECMA PREN 3528-1988 Aerospace Series Steel FE-PA95 Solution Treated and Precipitation Treatment 1750 Less Than or Equal to Rm Less Than or Equal to 2000 MPa Bar for Machining De L.pdf AECMA PREN 3528-1988 Aerospace Series Steel FE-PA95 Solution Treated and Precipitation Treatment 1750 Less Than or Equal to Rm Less Than or Equal to 2000 MPa Bar for Machining De L.pdf
  • AECMA PREN 3529-1999 Aerospace Series Steel FE-PM2701 (X2NiCoMo18-8-5) Vacuum Induction Melted and Vacuum Arc Remelted Solution Treated and Precipitation Treated Forgings a or D Ler.pdf AECMA PREN 3529-1999 Aerospace Series Steel FE-PM2701 (X2NiCoMo18-8-5) Vacuum Induction Melted and Vacuum Arc Remelted Solution Treated and Precipitation Treated Forgings a or D Ler.pdf
  • AECMA PREN 3530-1988 Aerospace Series Steel FE-PA95 Softened Reference Heat Treatment Solution Treated and Precipitation Treated Forging Stock De Less Than or Equal to 200 mm Issue.pdf AECMA PREN 3530-1988 Aerospace Series Steel FE-PA95 Softened Reference Heat Treatment Solution Treated and Precipitation Treated Forging Stock De Less Than or Equal to 200 mm Issue.pdf
  • AECMA PREN 3531-1999 Aerospace Series Steel FE-PM2701 (X2NiCoMo18-8-5) Vacuum Induction Melted and Vacuum Arc Remelted Solution Treated and Precipitation Treated Sheet and Strip a r.pdf AECMA PREN 3531-1999 Aerospace Series Steel FE-PM2701 (X2NiCoMo18-8-5) Vacuum Induction Melted and Vacuum Arc Remelted Solution Treated and Precipitation Treated Sheet and Strip a r.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1