1、AEROSPACE STANDARD PORT-FLUID CONNECTION, RING LOCKED INSERT, STANDARD DIMENSIONS FOR AS1958Copyright 2012 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopy
2、ing, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 1988-01REAFFIRMED 2012-11THIRD
3、ANGLE PROJECTION CUSTODIAN: E-25 FEDERAL SUPPLY CLASS 4730 AS1958SHEET 1 OF 2PROCUREMENT SPECIFICATION: NONESAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicalandengineering sciences. Theuse ofthis report is entirely voluntary, andits appl
4、icability and suitability forany particular use,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay berevised, reaffirmed, stabilized, orcancelled. SAE invites yourwrittencomments andsu
5、ggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS1958RATIONALE AS1958 HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE FIVE-YEAR REVIEW POLICY. AEROSPACE STANDARD AS1958 SHEET 2 OF 2PORT-FLUID CONNECTION, RING LOCKED INSERT
6、, STANDARD DIMENSIONS FOR NOTES /1/ RECOMMENDED MIN FULL THREAD DEPTH. 2. DIMENSIONS IN INCHES. DIMENSIONING AND TOLERANCING: ANSI Y14.5M-1982. 3. SURFACE TEXTURE: SYMBOLS PER ANSI Y14.36-1978; REQU IREMENTS PER ANSI/ASME B46. 1-1985. UNLESS OTHERWISE SPECIFIED SURFACES TO BE 125 MICROINCHES Ra. 141 THE MINIMUM PORT DIAMETER “T“ AND PORT DEPTHS SHOWN ARE SATISFACTORY FOR USE IN MATERIALS THAT EXHIBIT A MINIMUM SHEAR STRENGTH OF 14 KSI AT MAXIMUM TEMPERATURE. SitE Aerospace .-AD! . An SAE International Group
