1、 AEROSPACE STANDARD BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .1900-32 UNJF-3AAS3250Copyright 2013 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or
2、 transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.o
3、rg SAE WEB ADDRESS: http:/www.sae.org ISSUED 1980-07REAFFIRMED 2007-06 REVISED 2013-01THIRD ANGLE PROJECTION CUSTODIAN: E-25 REV.C FEDERAL SUPPLY CLASS 5306 AS3250 SHEET 1 OF 3 REV. C PROCUREMENT SPECIFICATION: AS7466SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE to
4、advance thestate of technicalandengineering sciences. Theuse ofthis report is entirely voluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five ye
5、ars at which time itmay berevised, reaffirmed, stabilized, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS3250C RATIONALE REVISE WRENCHING ELEMENT RUNOUT CALLOUT (RE
6、LOCATE FROM WRENCH FLATS TO POINTS). REVISE THREAD SPECIFICATION TO AS8879. REVISE LIGHTENING HOLE CONFIGURATION (ADD SECTION VIEW) TO ALLOW OPTIONAL SHAPE AT BOTTOM OF HOLE, ADD SYMBOL FOR AND MMC TO POSITION TOLERANCE FOR SAFETY WIRE HOLES, DELETE .015 MIN RADIUS AT BASE OF WRENCH PAD, AND FIGURE
7、1 REDRAWN. FIGURE 1 - BOLT AEROSPACE STANDARD AS3250 SHEET 2 OF 3 REV. C BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .1900-32 UNJF-3A TABLE 1 - PART NUMBERS AND DIMENSIONS PART NO. L N MIN M MAX APPROX.MASSLB/100 PART
8、NO. L N MIN M MAX APPROX.MASSLB/100 AS3250-03 .302 - .322 .025 .092 .59 AS3250-25 1.678 - 1.698 .936 1.058 1.52 AS3250-04 .365 - .385 .025 .092 .63 AS3250-26 1.740 - 1.760 .998 1.120 1.56 AS3250-05 .428 - .448 .025 .092 .68 AS3250-27 1.802 - 1.822 1.060 1.182 1.60 AS3250-06 .490 - .510 .025 .092 .72
9、 AS3250-28 1.865 - 1.885 1.123 1.245 1.64 AS3250-07 .552 - .572 .025 .092 .76 AS3250-29 1.928 - 1.948 1.186 1.308 1.68 AS3250-08 .615 - .635 .025 .092 .80 AS3250-30 1.990 - 2.010 1.248 1.370 1.73 AS3250-09 .678 - .698 .025 .092 .84 AS3250-31 2.115 - 2.135 1.373 1.495 1.82 AS3250-10 .740 - .760 .025
10、120 .88 AS3250-32 2.240 - 2.260 1.498 1.620 1.90 AS3250-11 .802 - .822 .060 .183 .92 AS3250-33 2.365 - 2.385 1.623 1.745 1.98 AS3250-12 .865 - .885 .123 .245 .97 AS3250-34 2.490 - 2.510 1.748 1.870 2.07 AS3250-13 .928 - .948 .186 .308 1.01 AS3250-35 2.615 - 2.635 1.873 1.995 2.15 AS3250-14 .990 - 1
11、010 .248 .370 1.05 AS3250-36 2.740 - 2.760 1.998 2.120 2.23 AS3250-15 1.052 - 1.072 .310 .432 1.09 AS3250-37 2.865 - 2.885 2.123 2.245 2.33 AS3250-16 1.115 - 1.135 .373 .495 1.14 AS3250-38 2.990 - 3.010 2.248 2.370 2.41 AS3250-17 1.178 - 1.198 .436 .558 1.18 AS3250-39 3.115 - 3.135 2.373 2.495 2.49
12、 AS3250-18 1.240 - 1.260 .498 .620 1.23 AS3250-40 3.240 - 3.260 2.498 2.620 2.57 AS3250-19 1.302 - 1.322 .560 .682 1.27 AS3250-41 3.365 - 3.385 2.623 2.745 2.66 AS3250-20 1.365 - 1.385 .623 .745 1.31 AS3250-42 3.490 - 3.510 2.748 2.870 2.74 AS3250-21 1.428 - 1.448 .686 .808 1.35 AS3250-43 3.615 - 3.
13、635 2.873 2.995 2.82 AS3250-22 1.490 - 1.510 .748 .870 1.39 AS3250-44 3.740 - 3.760 2.998 3.120 2.92 AS3250-23 1.552 - 1.572 .810 .932 1.43 AS3250-45 3.865 - 3.885 3.123 3.245 3.00 AS3250-24 1.615 - 1.635 .873 .995 1.47 AEROSPACE STANDARD AS3250 SHEET 3 OF 3 REV. C BOLT, MACHINE - DOUBLE HEXAGON EXT
14、ENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .1900-32 UNJF-3A NOTES: 1. FOR PART NUMBERS AS3250-03 THRU AS3250-14 THE THREAD PD (DATUM Z ) SHALL REPLACE DATUM Y. 2. MATERIAL: CORROSION AND HEAT RESISTANT NICKEL ALLOY PER AMS5662 (UNS N07718). 3. PROCURE
15、MENT SPECIFICATION: AS7466. 4. FINISH: SILVER PLATE PER AMS2411 .0002 TO .0006 THICK AT THREAD PD. DIMENSIONS SPECIFIED ARE AFTER PLATING. 5. FLUORESCENT PENETRANT INSPECTION BEFORE PLATING PER ASTM E1417/E1417M, TYPE 1, SENSITIVITY LEVEL 2. 6. SURFACE TEXTURE: SYMBOLS PER ASME Y14.36M. REQUIREMENTS
16、 PER ASME B46.1. UNLESS OTHERWISE SPECIFIED, SURFACES TO BE 125 MICROINCHES Ra. 7. BREAK SHARP EDGES .003 TO .015, UNLESS OTHERWISE SPECIFIED. 8. DIMENSIONS IN INCHES. 9. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M-1982 (ASME PUBLICATION). 10. DO NOT USE UNASSIGNED PART NUMBERS. 11. A CHANGE BAR (l
17、) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS, NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY. AS AND AMS ARE SAE INTERNATIONAL PUBLICATIONS. ASME IS AN AMERICAN SOCIETY OF MECHANICAL ENGINEERS PUBLICATION. ASTM IS AN ASTM INTERNATIONAL PUBLICATION.
