1、_SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising theref
2、rom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions.Copyright 2013 SAE International All rights reserved. No part of this pub
3、lication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970
4、(outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AS4488AEROSPACESTANDARDAS4488 Issued 1991-02 Reaffirmed 2013-01 Tubular Assemblies,
5、Fusion Welded, Inspection Processes and Acceptance Standards For RATIONALEAS4488 has been reaffirmed to comply with the SAE five-year review policy. SAE AS4488 Page 2 of 23 SAE AS4488 Page 3 of 23 SAE AS4488 Page 4 of 23 SAE AS4488 Page 5 of 23 SAE AS4488 Page 6 of 23 SAE AS4488 Page 7 of 23 SAE AS4
6、488 Page 8 of 23 SAE AS4488 Page 9 of 23 SAE AS4488 Page 10 of 23 SAE AS4488 Page 11 of 23 SAE AS4488 Page 12 of 23 SAE AS4488 Page 13 of 23 SAE AS4488 Page 14 of 23 SAE AS4488 Page 15 of 23 SAE AS4488 Page 16 of 23 SAE AS4488 Page 17 of 23 SAE AS4488 Page 18 of 23 SAE AS4488 Page 19 of 23 SAE AS4488 Page 20 of 23 SAE AS4488 Page 21 of 23 SAE AS4488 Page 22 of 23 SAE AS4488 Page 23 of 23
