1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising theref
2、rom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions.Copyright 2013 SAE International All rights reserved. No part of this pub
3、lication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970
4、outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AS4510AEROSPACESTANDARDAS4510 Issued 1996-05 Reaffirmed 2013-01 Fittings, Weld, Flui
5、d Connection, 5000 psi RATIONALEAS4510 has been reaffirmed to comply with the SAE five-year review policy. SAE AS4510 Page 2 of 19 SAE AS4510 Page 3 of 19 SAE AS4510 Page 4 of 19 SAE AS4510 Page 5 of 19 SAE AS4510 Page 6 of 19 SAE AS4510 Page 7 of 19 SAE AS4510 Page 8 of 19 SAE AS4510 Page 9 of 19 SAE AS4510 Page 10 of 19 SAE AS4510 Page 11 of 19 SAE AS4510 Page 12 of 19 SAE AS4510 Page 13 of 19 SAE AS4510 Page 14 of 19 SAE AS4510 Page 15 of 19 SAE AS4510 Page 16 of 19 SAE AS4510 Page 17 of 19 SAE AS4510 Page 18 of 19 SAE AS4510 Page 19 of 19
