1、 SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there
2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions. Copyright 2012 SAE International All rights reserved. No part of this p
3、ublication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-497
4、0 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AS5649 AEROSPACE STANDARD AS5649 Issued 2007-05 Reaffirmed 2012-12 Wire and Cable
5、 Marking Process, UV Laser RATIONALE AS5649 has been reaffirmed to comply with the SAE five-year review policy. SAE AS5649 Page 2 of 16 SAE AS5649 Page 3 of 16 SAE AS5649 Page 4 of 16 SAE AS5649 Page 5 of 16 SAE AS5649 Page 6 of 16 SAE AS5649 Page 7 of 16 SAE AS5649 Page 8 of 16 SAE AS5649 Page 9 of 16 SAE AS5649 Page 10 of 16 SAE AS5649 Page 11 of 16 SAE AS5649 Page 12 of 16 SAE AS5649 Page 13 of 16 SAE AS5649 Page 14 of 16 SAE AS5649 Page 15 of 16 SAE AS5649 Page 16 of 16
