1、AEROSPACE STANDARD ACCESSORY, F ADAPTER, ROTATABLE, CONNECTOR, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, TYPE 1, (SERIES 1 OR 2)AS81511/13Copyright 2014 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval syst
2、em or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerService
3、sae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 2014-10THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 FEDERAL SUPPLY CLASS 5935 AS81511/13SHEET 1 OF 3PROCUREMENT SPECIFICATION: AS81511SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicaland
4、engineering sciences. Theuse ofthisreportis entirelyvoluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, is thesole responsibilityoftheuser.”SAE reviews eachtechnicalreport at least every five years at which time itmay berevised,r
5、eaffirmed, stabilized, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS81511/13RATIONALE THIS DETAIL SPECIFICATION SHEET IS WRITTEN TO PERMIT THE CANCELLATION AND SUP
6、ERSESSION OF MIL-C-81511/13 WITH THIS DOCUMENT. NOTICE THE COMPLETE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS81511. FIGURE 1 - CONNECTOR ACCESSORY, F ADAPTER AEROSPACE STANDARD AS81511/13SHEET 2 OF 3ACCESSORY, F ADAPTER, ROTATAB
7、LE, CONNECTOR, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, TYPE 1, (SERIES 1 OR 2)TABLE 1 - PART NUMBER AND CHARACTERISTICS PARTNUMBER M81511/13- TEMP.RATING (C) SHELLSIZEAPPROX. WEIGHT (LB) CABLERANGE XMAX. H L APPLICABLECONNECTOR CLASSESAPPLICABLESCREWDASHNUMBERNAS
8、M35275- VDIA.WDIA.08A1 175 8 .016 .125(3.18) .062(1.57) .775(19.69).625(15.88).562(14.27)1.375(34.93)1.312(33.32)E, W 217 08B1 200 A, F 217 10A1 175 10 .018 .250(6.35) .125(3.18) .955(24.26).625(15.88).562(14.27)1.375(34.93)1.312(33.32)E, W 218 10B1 200 A, F 218 14A1 175 14 .023 .500(12.70).250(6.35
9、) 1.145(29.08).625(15.88).562(14.27)1.375(34.93)1.312(33.32)E, W 219 14B1 200 A, F 219 16A1 175 16 .026 .625(15.88).375(9.53) 1.210(30.73).625(15.88).562(14.27)1.375(34.93)1.312(33.32)E, W 219 16B1 200 A, F 219 18A1 175 18 .031 .750(19.05).500(12.70)1.330(33.78).625(15.88).562(14.27)1.375(34.93)1.31
10、2(33.32)E, W 219 18B1 200 A, F 219 20A1 175 20 .036 .875(22.23).625(15.88)1.470(37.34).703(17.86).640(16.26)1.452(36.88)1.390(35.31)E, W 220 20B1 200 A, F 220 22A1 175 22 .043 1.000(25.40).750(19.05)1.580(40.13).703(17.86).640(16.26)1.452(36.88)1.390(35.31)E, W 221 22B1 200 A, F 221 24A1 175 24 .051
11、 1.125(28.58).750(19.05)1.720(43.69).703(17.86).640(16.26)1.452(36.88)1.390(35.31)E, W 221 24B1 200 A, F 221 REQUIREMENTS: ALL REQUIREMENTS SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS81511. 1. DESIGN: ADAPTERS SHALL BE DESIGNED IN ACCORDANCE WITH FIGURE 1 AND TABLE 1. DIMENSIONS ARE IN
12、 INCHES AND APPLY AFTER PLATING. METRIC EQUIVALENTS ARE GIVEN FOR GENERAL INFORMATION ONLY AND ARE BASED ON 1 INCH = 25.4 MM. UNLESS OTHERWISE SPECIFIED, TOLERANCES ARE .016 INCHES. THIS REAR ACCESSORY SHALL CONFORM TO THE AS81511 FIGURE TITLED “DESIGN STANDARD FOR ROTATABLE ACCESSORY HARDWARE.“ 2.
13、MATERIALS/PLATING: FINISH: 175 C-CADMIUM PLATE OVER NICKEL, OLIVE DRAB IN COLOR (FOR USE WITH CLASS E AND W CONNECTORS) 200 C-ELECTROLESS NICKEL (FOR USE WITH CLASS A AND F CONNECTORS) BODY AND SADDLES: ALUMINUM ALLOY IN ACCORDANCE WITH AS81511. SCREWS: IN ACCORDANCE WITH NASM35275 (SEE TABLE 1) APP
14、LICATION NOTES: 1. AS81511 CONNECTORS AND ACCESSORIES ARE NOT RECOMMENDED FOR NEW DESIGN. AEROSPACE STANDARD AS81511/13SHEET 3 OF 3ACCESSORY, F ADAPTER, ROTATABLE, CONNECTOR, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, TYPE 1, (SERIES 1 OR 2)SPECIFICATION NOTES: NOTI
15、CE THIS DOCUMENT REFERENCES A PART WHICH CONTAINS CADMIUM AS A PLATING MATERIAL. CONSULT LOCAL OFFICIALS IF YOU HAVE QUESTIONS CONCERNING CADMIUMS USE. 1. A CHANGE BAR (l) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS, NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY.
