1、 AEROSPACE STANDARD CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NON- ENVIRONMENTAL, SELF-LOCKING AND NON-SELF-LOCKING, 45, CATEGORY 4B (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) AS85049/43Copyright 2014 SAE International All righ
2、ts reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA a
3、nd Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 1998-08REVISED 2009-07 REAFFIRMED 2014-09THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 REV.B FEDERAL SUPPLY CLASS 5935 AS85049/43 SHEET 1 OF 5 REV. B PROCUREMENT SP
4、ECIFICATION: AS85049SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicalandengineeringsciences.The useofthis reportisentirelyvoluntary, andits applicability and suitability forany particular use,including any patent infringement arising the
5、refrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay berevised,reaffirmed, stabilized, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit ht
6、tp:/www.sae.org/technical/standards/AS85049/43B RATIONALE AS85049/43B HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE FIVE-YEAR REVIEW POLICY. THE REQUIREMENTS FOR ACQUIRING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS SPECIFICATION SHEET AND THE LATEST ISSUE OF SAE AS85049. FIGURE 1 - CONFIGURATIO
7、N AND DIMENSIONS SELF-LOCKING AND NON-SELF-LOCKING AEROSPACE STANDARD AS85049/43 SHEET 2 OF 5 REV. B CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NON- ENVIRONMENTAL, SELF-LOCKING AND NON-SELF-LOCKING, 45, CATEGORY 4B (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL
8、83723 SERIES III CONNECTORS)TABLE 1A - DIMENSIONS (NON-SELF-LOCKING ONLY) DASH NUMBER FOR CONNECTOR SHELL SIZE (REF) NONSELF-LOCKING AS81703 SERIES 3 MIL-DTL-26482 SERIES 2 MIL-DTL-5015 CRIMP MIL-DTL-83723 SERIES III A MAX DIA L MAX CLOSED M MAX R MAX -3 3 .669 (16.99) 1.490 (37.85) 1.160 (29.46) .
9、540 (13.72) -8 8 8S 8 .617 (15.67) 1.490 (37.85) 1.160 (29.46) -10 10 10S, 10SL 10 .734 (18.64) 1.534 (38.96) 1.204 (30.58) -12 7 12 12S, 12 12 .858 (21.79) 1.608 (40.84) 1.278 (32.46) -14 12 14 14S, 14 14 .984 (24.99) 1.650 (41.91) 1.320 (33.53) -16 19 16 16S, 16 16 1.112 (28.24) 1.756 (44.60) 1.42
10、6 (36.22) -18 27 18 18 18 1.218 (30.94) 1.874 (47.60) 1.544 (39.22)-20 37 20 20 20 1.345 (34.16) 1.918 (48.72) 1.588 (40.34) -22 22 22 22 1.468 (37.29) 1.962 (49.83) 1.632 (41.45) -24 24 24 24 1.593 (40.46) 2.006 (50.95) 1.676 (42.57) .540 (13.72) -28 28 1.969 (50.01) 2.301 (58.45) 1.801 (45.75) .70
11、2 (17.83) -32 32 2.219 (56.36) 2.389 (60.68) 1.889 (47.98) -36 36 2.469 (62.71) 2.433 (61.80) 1.933 (49.10) -40 40 2.719 (69.06) 2.434 (61.82) 1.934 (49.12) -44 44 2.969 (75.41) 2.700 (68.58) 2.200 (55.88) -48 48 3.219 (81.76) 2.788 (70.82) 2.288 (58.12) .702 (17.83) -61 61 1.653 (41.99) 2.006 (50.9
12、5) 1.676 (42.57) .540 (13.72) TABLE 1B DIMENSIONS (SELF-LOCKING ONLY) DASH NUMBER FOR CONNECTOR SHELL SIZE (REF) SELF-LOCKING AS81703 SERIES 3 MIL-DTL-26482 SERIES 2 MIL-DTL-5015 CRIMP MIL-DTL-83723 SERIES III A MAX DIA L MAX CLOSED M MAX R MAX -3 _/1 3 -8 8 8S 8 .885 (22.48) 1.650 (41.91) 1.320 (33
13、53) .710 (18.03) -10 10 10S, 10SL 10 1.010 (25.65) 1.694 (43.03) 1.364 (34.65) -12 7 12 12S, 12 12 1.135 (28.83) 1.768 (44.91) 1.438 (36.53) -14 12 14 14S, 14 14 1.260 (32.00) 1.810 (45.97) 1.480 (37.59) -16 19 16 16S, 16 16 1.385 (35.18) 1.916 (48.67) 1.586 (40.28) -18 27 18 18 18 1.510 (38.35) 2.
14、034 (51.67) 1.704 (43.28)-20 37 20 20 20 1.635 (41.53) 2.078 (52.78) 1.748 (44.40) -22 22 22 22 1.760 (44.70) 2.122 (53.90) 1.792 (45.52) -24 24 24 24 1.885 (47.88) 2.166 (55.02) 1.836 (46.63) .710 (18.03) -28 28 2.135 (54.23) 2.461 (62.51) 1.961 (49.81) .890 (22.61) -32 32 2.395 (60.83) 2.549 (64.7
15、4) 2.049 (52.04) -36 36 2.635 (66.93) 2.593 (65.86) 2.093 (53.16) -40 40 2.885 (73.28) 2.599 (66.01) 2.094 (53.19) -44 44 3.135 (79.63) 2.860 (72.64) 2.360 (59.94) -48 48 3.385 (85.98) 2.948 (74.88) 2.448 (62.18) .890 (22.61) -61 _/1 61 _/1 NOT AVAILABLE ON SELF-LOCKING CONFIGURATION AEROSPACE STAND
16、ARD AS85049/43 SHEET 3 OF 5 REV. B CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NON- ENVIRONMENTAL, SELF-LOCKING AND NON-SELF-LOCKING, 45, CATEGORY 4B (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)TABLE IC. DIMENSIONS (SELF-LOCKING AN
17、D NON-SELF-LOCKING, CONTINUED). DASH NUMBER F (SEE NOTE 4) S .020 T .015 SCREW SIZE Z MAX W +.000 -.062 SCREW LENGTH G MAX WIRE BUNDLE ACCOMMODATION RANGE MAX MIN -3 .204 (5.18) .125 (3.18) .250 (6.35) .125 (3.18) 6-32 .772 (19.61) .500 (12.70) .782 (19.86) -8 .204 (5.18) .125 (3.18) .772 (19.61) .5
18、00 (12.70) .782 (19.86) -10 .286 (7.26) .187 (4.75) .803 (20.40) .500 (12.70) .862 (21.89) -12 .416 (10.57) .291 (7.39) .866 (22.00) .625 (15.88) 1.018 (25.86) -14 .476 (12.09) .351 (8.92) .928 (23.57) .625 (15.88) 1.076 (27.33) -16 .625 (15.88) .501 (12.73) .250 (6.35) .125 (3.18) 6-32 .991 (25.17)
19、 .625 (15.88) 1.349 (34.26) -18 .706 (17.93) .518 (13.16) .375 (9.53) .156 (3.96) 8-32 1.110 (28.19) .750 (19.05) 1.481 (37.62) -20 .831 (21.11) .581 (14.76) 1.172 (29.77) .875 (22.23) 1.587 (40.31) -22 .956 (24.28) .644 (16.36) 1.235 (31.37) 1.000 (25.40) 1.688 (42.88) -24 1.081 (27.46) .706 (17.93
20、) .375 (9.53) .156 (3.96) 1.297 (32.94) 1.125 (28.58) 1.805 (45.85) -28 1.187 (30.15) .750 (19.05) .500 (12.70) .188 (4.78) 8-32 1.543 (39.19) 1.250 (31.75) 2.050 (52.07) -32 1.250 (31.75) .875 (22.23) -20 1.668 (42.37) 1.250 (31.75) 2.416 (61.37) -36 1.375 (34.93) .938 (23.83) 1.793 (45.54) 1.500 (
21、38.10) 2.526 (64.16) -40 1.500 (38.10) .938 (23.83) .500 (12.70) 1.918 (48.72) 1.500 (38.10) 2.596 (65.94) -44 1.750 (44.45) 1.188 (30.18) .625 (15.88) 2.132 (54.15) 1.750 (44.45) 2.890 (73.41) -48 1.875 (47.63) 1.312 (33.32) .625 (15.88) .188 (4.78) -20 2.257 (57.33) 2.000 (50.80) 3.374 (85.70) -61
22、 1.081 (27.46) .706 (17.93) .375 (9.53) .156 (3.96) 8-32 1.204 (30.58) 1.125 (28.58) 1.805 (45.85) NOTES: 1. DIMENSIONS ARE IN INCHES. 2. DIMENSIONS APPLY AFTER PLATING. 3. METRIC EQUIVALENTS ARE GIVEN FOR GENERAL INFORMATION ONLY AND ARE BASED UPON 1.00 INCH = 25.4 MM. 4. “WIRE BUNDLE ACCOMMODATION
23、 RANGE” DIMENSION IS DEFINED AS THE ENVELOPE AREA FOR THE WIRE BUNDLE. THIS DIMENSION IS NOT MEANT TO DEFINE THE CLAMP HARDWARE LIMITS. AEROSPACE STANDARD AS85049/43 SHEET 4 OF 5 REV. B CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NON- ENVIRONMENTAL, SELF-LOCKING AND NON-SELF-LOCKING, 45, CATEG
24、ORY 4B (FOR MIL-DTL-5015 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)REQUIREMENTS: CONNECTOR ACCESSORY DESIGN AND CONSTRUCTION: 1. DIMENSIONS AND CONFIGURATION: SEE FIGURE 1 AND TABLE 1. 2. INTERFACE DIMENSIONS SHALL CONFORM TO SAE AS85049, FIGURE 4 OR 4A
25、 3. ACCESSORIES CONSIST OF A COUPLING NUT AND STRAIN RELIEF. THE COUPLING NUT SHALL BE CAPTIVATED TO THE STRAIN RELIEF AND ROTATABLE. 4. DETENTED SELF-LOCKING PROVIDES A POSITIVE AUDIBLE DETENTED COUPLING. 5. THE STRAIN RELIEF ACCOMMODATES SAE AS85049/127 BUSHING STRIP. 6. CLAMPS SHALL HAVE NO PROT
26、RUSIONS OR SHARP EDGES WHICH MAY PINCH CABLE. 7. MATERIAL AND FINISH: SEE TABLE 2. ACCESSORIES SHALL BE AS SHOWN IN TABLE 2. 8. CLAMPS, SCREWS AND LOCK WASHERS: 300 SERIES CORROSION-RESISTANT STEEL, PASSIVATE. 9. SELF-LOCKING DEVICE: CORROSION RESISTANT MATERIAL. TABLE 2. MATERIAL AND FINISH FIGURE
27、MATERIAL FINISH 1 ALUMINUM ALLOY IN ACCORDANCE WITH SAE AS85049 A N 1/ W 2/ X, Y Z 2/ 1/ NOT FOR NAVY USE. AIR FORCE USE IS FOR SPACE APPLICATIONS ONLY. W IS THE PREFERRED FINISH. 2/ W “S” FOR DETENTED SELF-LOCKING (SEE REQMT 4) “N” FOR NON-DETENTED SELF-LOCKING “-“ (DASH) FOR NON-SELF-LOCKING DASH
28、NUMBER FINISH (SEE TABLE 2) 13. SUPERSESSION DATA: SPECIFICATION NOTES NOTICE THIS DOCUMENT REFERENCES A PART WHICH CONTAINS CADMIUM AS A PLATING MATERIAL. CONSULT LOCAL OFFICIALS IF YOU HAVE QUESTIONS CONCERNING CADMIUMS USE. A CHANGE BAR (|) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE
29、 USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY.
