1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirelyvoluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefro
2、m, is the sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions.Copyright 2006 SAE InternationalAll rights reserved. No part of this publication may be
3、reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying,recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)Tel: 724-776-4970 (outside USA)Fax: 724-
4、776-0790Email: CustomerServicesae.orgSAE WEB ADDRESS: http:/www.sae.orgSURFACEVEHICLERECOMMENDEDPRACTICEJ2235REAF.NOV2006Issued 1993-06Reaffirmed 2006-11Superseding J2235 JUN1999Paint and Trim Code Location1. ScopeThis SAE Recommended Practice is designed to provide readily accessible paint and trim
5、 codeinformation on all passenger vehicles, lightweight trucks, and vans in a way that minimizes the time and effortrequired to locate and effectively use that information for body repair, parts ordering, vehicle maintenance, andinformation systems.1.1 PurposeThe purpose of this document is to stand
6、ardize locations for permanent labels on the vehicle toidentify the body paint and trim colors as applied by the vehicle manufacturer. The label is to be readilyaccessible and readable without using tools.1.2 RationaleThis document has been reaffirmed to comply with the SAE 5-Year Review policy.2. R
7、eferences2.1 Applicable PublicationsThere are no referenced publications specified herein.3. Definitions3.1 Paint CodeA code established by the vehicle manufacturer and paint supplier for paint color(s) applied forany given vehicle.3.2 Body (Primary) ColorA base predominant color applied by the vehi
8、cle manufacturer.3.3 Trim ColorAn interior paint color in the appearance package.3.4 Secondary ColorA color used to complement the body color.3.5 Accent ColorA color applied to bumpers and attaching body parts.3.6 StripeAn optional exterior accent package adhesive/paint as applied by the vehicle man
9、ufacturer.3.7 MouldingAn exterior garnish applied by the vehicle manufacturer.SAE J2235 Reaffirmed NOV2006-2-4. Code InterpretationThe codes are to be interpreted from OEM service bulletins, OEM and aftermarketservice manuals, and OEM or paint manufacturers color books/bulletins.5. Label and/or Plate LocationThe label and/or plate is to be located as follows:1. Primary - left B pillar2. Secondary - deck lid/tailgate3. Tertiary - right B pillarPREPARED BY THE SAE PAINT AND TRIM CODE LOCATION COMMITTEE
