1、 AEROSPACE STANDARD FITTING END, INTEGRAL CENTERED WELD LIP, DESIGN STANDARD, METRIC MA2307Copyright 2015 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopyi
2、ng, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 1996-10REVISED 1997-01 REAFFIRME
3、D 2015-04THIRD ANGLE PROJECTION CUSTODIAN: G-3/G-3B /5/ REV.A FEDERAL SUPPLY CLASS 4730MA2307 SHEET 1 OF 3 REV. A PROCUREMENT SPECIFICATION: NONE /2/SAE Technical Standards Board Rules provide that: “This report ispublished by SAE toadvance thestate of technicalandengineering sciences. Theuse ofthis
4、report is entirelyvoluntary, andits applicability and suitability forany particularuse,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay berevised,reaffirmed, stabilized, orcancelled.
5、 SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/MA2307A RATIONALE MA2307A HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE FIVE-YEAR REVIEW POLICY. AEROSPACE STANDARD MA2307 SHEET 2 OF 3 REV. A FITTING END, INTEGRAL CENTERED WELD LIP, DESIGN STANDARD, METRIC AEROSPACE STANDARD MA2307 SHEET 3 OF 3 REV. A FITTING END, INTEGRAL CENTERED WELD LIP, DESIGN STANDARD, METRIC
