SANS 10198-14-1996 The selection handling and installation of electric power cables of rating not exceeding 33 kV Part 14 Installation of aerial bundled conductor (ABC) cables《额定电压.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CNS 4364-1981 Hexagon Head Fitting Bolts with Long Threaded Portion《六角头配合螺栓（具长螺纹部份）》.pdf

CNS 4365-1981 Hexagon Head Fitting Bolts with Short Threaded Portion《六角头配合螺栓（具短螺纹部份）》.pdf

CNS 4366-1987 Hexagon Bolts with Large Widths Across Flats for Steel Structures (Joints with Hightensile Prestressed Bolts)《六角头螺栓（具大对面宽度、高预力连接钢结构用）》.pdf

CNS 4367-1978 Knuckle Threads for Steel Sheet pieces (up to 0 5 mm Thickness and Appropriated Couplings Dimensions Tolerances)《圆螺纹（厚0 5MM以下之钢皮制品及其 配合螺纹）》.pdf

CNS 4368-1978 Lifting Hooks Knuckle Threads《圆螺纹（起重机吊钩用）》.pdf

CNS 4369-1978 Round Thread with Clearance and Flat Flank with Pitch 7 mm Nominal Sizes《圆螺纹（具有间隙、浅螺腹，螺距为7MM之标称尺寸）》.pdf

CNS 4370-1978 Round Thread with Clearance and Flat Flank with Pitch 7mm (Limits of Size and Deviation--Tolerances and Permissible Wear of Thread Gauges)《圆螺纹(具有间隙浅螺腹、螺距为7mm之限界尺寸和偏差螺.pdf

CNS 4371-1978 Round Thread with Clearance and Steep Flank with Pitch 7 mm Theoretic Values《圆螺纹（具有间隙、深螺腹、螺距为7MM之理论值）》.pdf

CNS 4372-1978 Round Thread with Clearance and Steep Flank with Pitch 7mm (Limits of Sizes and Deviations--Tolerances and Permissible Wear of Thread Gauges)《圆螺纹(具有间隙,深螺腹,螺距7mm之螺纹限界尺.pdf