SANS 15127-2005 Information and documentation - Vocabulary《信息和文档 词汇》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4D873-B6-2017 THERMOPLASTIC POLYOLEFIN ELASTOMER 15% MINERAL FILLED HIGH IMPACT LOW CLTE MOLDING COMPOUND FULLY PAINTED ONLY EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A.pdf

FORD WSS-M4D879-A3-2010 POLYCARBONATE + POLYETHYLENE TEREPHTHALATE BLEND (PC + PET) MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《外部聚碳酸酯+聚乙烯对苯二甲酸酯混合物(PC + PET)模塑.pdf

FORD WSS-M4D879-B2-2015 POLYCARBONATE + POLYETHYLENE TEREPHTHALATE BLEND (PC + PET) FULLY PAINTED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D891-A3-2011 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) MOLDING COMPOUND HIGH IMPACT AND HIGHER FLOW TO BE USED WITH FORD WSS-M99P1111-A 《耐冲击且更高流动性的聚亚苯基乙醚+聚酰胺混合物(P.pdf

FORD WSS-M4D906-B1-2012 ACRYLONITRILE BUTADIENE STYRENE (ABS) EXTRUSION MOLDING COMPOUND MEDIUM HEAT RESISTANT INTERIOR PAINTED APPLICATIONS ONLY TO BE USED WITH FORD WSS-M99P1111.pdf

FORD WSS-M4D906-B2-2012 ACRYLONITRILE BUTADIENE STYRENE (ABS) EXTRUSION MOLDING COMPOUND MEDIUM HEAT RESISTANT EXTERIOR PAINTED APPLICATIONS ONLY TO BE USED WITH FORD WSS-M99P1111.pdf

FORD WSS-M4D908-A2-2006 ACRYLONITRILE BUTADIENE STYRENE (ABS) HEAT RESISTANT POST CONSUMER RECYCLATE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M4D908-A)《.pdf

FORD WSS-M4D911-B-2011 POLYPROPYLENE (PP) COPOLYMER HIGH IMPACT 100% RECYCLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《耐冲击100%回收的聚丙烯(PP)共聚物模塑材料 与福特WSS-M99P1111-A 一.pdf

FORD WSS-M4D924-B1-2015 POLYCARBONATE ACRYLONITRILE BUTADIENE STYRENE BLEND (PC+ABS) MEDIUM IMPACT MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf