SANS 1700-13-8-2003 Fasteners Part 13 Tapping screws Section 8 Tapping screw and washer assemblies with plain washers《紧固件 第13部分：自攻螺钉 第8节：自攻螺钉和平垫圈组合件》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASD-STAN PREN 3514-1988 Aerospace Series Steel FE-PL711 Hardened and Tempered 1100 Less Than or Equal to Rm Less Than or Equal to 1300 MPa Bar and Wire for Bolts De Less Than or Eq.pdf

ASD-STAN PREN 3515-1998 Aerospace Series Steel FE-PL8201 (41NiCrMo2) Air Melted Hardened and Tempered Forgings De Less Than or Equal to 25 mm 1 100 MPa Less Than or Equal to Rm Les.pdf

ASD-STAN PREN 3516-1998 Aerospace Series Steel FE-PL8201 (41NiCrMo2) Air Melted Softened Forging Stock a or D Less Than or Equal to 300 mm (Edition P2)《航空航天系列 a或D≤300mm的FE-PL8201(4.pdf

ASD-STAN PREN 3517-1994 Aerospace Series Steel FE-PL2105 Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 150 mm 1080 MPa Less Than or Equal to Rm Less T.pdf

ASD-STAN PREN 3519-1994 Aerospace Series Steel FE-PL2105 Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 150 mm 880 MPa Less Than or Equal to Rm Less Th.pdf

ASD-STAN PREN 3520-1994 Aerospace Series Steel FE-PL2105 Air Melted Softened Forging Stock a or D Less Than or Equal to 300 mm (Edition P 2)《航空航天系列 a或D≤300mm的FE-PL2105(41NiCrMo2)敞熔.pdf

ASD-STAN PREN 3521-1998 Aerospace Series Steel FE-PL2106 (30CrNiMo8) Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 150 mm 900 MPa Less Than or Equal t.pdf

ASD-STAN PREN 3522-1988 Aerospace Series Steel FE-PL79 Softened Reference Heat Treatment Carburized Hardened and Tempered Forging Stock De Less Than or Equal to 200 mm (Issue P 1)《.pdf

ASD-STAN PREN 3523-1999 Aerospace Series Steel FE-PL1505 (15CrMoV6) Air Melted Hardened and Tempered Bar for Machining De Less Than or Equal to 100 mm 1 080 MPa Less Than or Equal .pdf