1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-23438-6 SANS 19765:2009Edition 1ISO/IEC TR 19765:2007Edition 1SOUTH AFRICAN NATIONAL STANDARD Information technology Survey of icons and s
4、ymbols that provide access to functions and facilities to improve the use of information technology products by the elderly and persons with disabilities This national standard is the identical implementation of ISO/IEC TR 19765:2007 and is adopted with the permission of the International Organizati
5、on for Standardization and the International Electrotechnical Commission. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS SANS 19765:2009 Edition 1 ISO/IEC TR 19765:2007 Edition 1 Table of c
6、hanges Change No. Date Scope National foreword This South African standard was approved by National Committee SABS TC 71, Information technology, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in Nov
7、ember 2009. Reference numberISO/IEC TR 19765:2007(E)ISO/IEC 2007TECHNICAL REPORT ISO/IECTR19765First edition2007-07-01Information technology Survey of icons and symbols that provide access to functions and facilities to improve the use of information technology products by the elderly and persons wi
8、th disabilities Technologies de linformation Vue densemble des symboles et des icnes fournissant un accs aux fonctions et aux quipements pour amliorer lutilisation des produits des technologies de linformation par les personnes ges et les personnes avec un handicap SANS 19765:2009This s tandard may
9、only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC TR 19765:2007(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces whi
10、ch are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems In
11、corporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
12、that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2007 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or me
13、chanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.
14、iso.org Published in Switzerland ii ISO/IEC 2007 All rights reservedSANS 19765:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC TR 19765:2007(E) ISO/IEC 2007 All rights reserved iiiContents Page Foreword iv Introduction v 1 Scope .
15、 1 2 Terms and definitions. 1 3 Collection of icons and symbols. 3 3.1 Presentation of icons and symbols 3 3.2 General icons and symbols . 3 3.2.1 Accessibility options software. 3 3.2.2 Facility for disabled users ICTA international symbol of access . 4 3.2.3 General facilities for the deaf and har
16、d of hearing 4 3.3 Input methods . 5 3.3.1 General. 5 3.3.2 Keyboard . 5 3.3.3 Pointing device . 9 3.3.4 Handwriting . 12 3.3.5 Audio 13 3.4 Output methods 15 3.4.1 Audio 15 3.4.2 Visual . 19 3.5 Telephony 25 3.5.1 Input and output 25 3.5.2 Output audio. 26 Bibliography . 28 SANS 19765:2009This s ta
17、ndard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC TR 19765:2007(E) iv ISO/IEC 2007 All rights reservedForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized
18、system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committee
19、s collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International St
20、andards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publica
21、tion as an International Standard requires approval by at least 75 % of the national bodies casting a vote. In exceptional circumstances, the joint technical committee may propose the publication of a Technical Report of one of the following types: type 1, when the required support cannot be obtaine
22、d for the publication of an International Standard, despite repeated efforts; type 2, when the subject is still under technical development or where for any other reason there is the future but not immediate possibility of an agreement on an International Standard; type 3, when the joint technical c
23、ommittee has collected data of a different kind from that which is normally published as an International Standard (“state of the art”, for example). Technical Reports of types 1 and 2 are subject to review within three years of publication, to decide whether they can be transformed into Internation
24、al Standards. Technical Reports of type 3 do not necessarily have to be reviewed until the data they provide are considered to be no longer valid or useful. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be
25、held responsible for identifying any or all such patent rights. ISO/IEC TR 19765, which is a Technical Report of type 3, was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 35, User interfaces. SANS 19765:2009This s tandard may only be used and printed by
26、 approved subscription and freemailing clients of the SABS .ISO/IEC TR 19765:2007(E) ISO/IEC 2007 All rights reserved vIntroduction Advances in information technology have promoted the use of information technology products as a necessary element of an individuals daily life. It is therefore very im
27、portant to make this technology accessible to everyone, especially to disabled and elderly people. These consumers need specific icons and symbols to enable them to access special facilities and functions to compensate for their disabilities and to give them confidence to use the various services ma
28、de available through information and communications technology product development. Increasing numbers of people, especially elderly and disabled, have problems using personal computers and the Internet for services, e.g. postal and banking services. It is essential to make the producers of these se
29、rvices aware of this, and to record and provide existing symbols and icons especially configured for use by disabled and elderly people. This Technical Report resulted from a survey of icons and symbols currently used to provide access to facilities and tools to support the needs of elderly and disa
30、bled users of information technology (IT) products. ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) do not in any way endorse, recommend or dissuade the use of any of the icons and symbols presented in this Technical Report. SANS 19765
31、:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .SANS 19765:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .TECHNICAL REPORT ISO/IEC TR 19765:2007(E) ISO/IEC 2007 All rights re
32、served 1Information technology Survey of icons and symbols that provide access to functions and facilities to improve the use of information technology products by the elderly and persons with disabilities 1 Scope Different users of information technology products possess different sets of abilities
33、. Some abilities may not ever be present in a user as they may have been born without them. Some abilities are acquired, developed or deteriorate over time due to education, maturity, injury, illness or age. Just as it is possible that a user possesses a combination of abilities, it is also possible
34、 that they may lack a combination of abilities. This Technical Report presents icons and symbols currently used to provide access to facilities and tools to support the needs of elderly and disabled users of information technology (IT) products, and could form the basis of a future International Sta
35、ndard which would provide a recommended collection of icons and symbols. These icons and symbols have been collected from a variety of sources including other standards, contemporary software products, web sites and hardware devices. These sources are cross-referenced and listed in the Bibliography.
36、 The icons and symbols presented here are categorized by modality and method of use. NOTE 1 ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) do not in any way endorse, recommend or dissuade the use of any of the icons and symbols presen
37、ted in this Technical Report. NOTE 2 The icon and symbol designs reproduced in this Technical Report remain the property of the source owners and may not be directly copied into IT products without the permission of the source owners. 2 Terms and definitions For the purposes of this document, the fo
38、llowing terms and definitions apply. 2.1 closed captioning viewer-selected display of dialogue, narration and sound effects of a video programme as words on a television screen cf. open captioning (2.7) NOTE Unlike subtitled movies, closed captioning allows the viewer to select whether or not to dis
39、play the captions that are transmitted within the broadcast signal in encoded (or closed) form. A decoder built into or attached to a television set is used to “open” the captions and display the words on the television screen. National Captioning Institute 7 2.2 electrical coupling transmission of
40、information from one device to another through a direct electrical connection ETSI EN 301 462 v1.1.1 (2000-03)1 SANS 19765:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/IEC TR 19765:2007(E) 2 ISO/IEC 2007 All rights reserved2.3 filt
41、er key logical setting that enables brief or repeated key strokes to be ignored or slows the keystroke input repeat rate 2.4 inductive coupling loop transmission of information from one device to another via a wireless connection 2.5 mouse commonly used pointing device that contains one or more butt
42、ons with which a user can interact with a computer system EXAMPLE Using a mouse button, a user can select objects or choices, initiate actions, or directly manipulate objects. 2.6 numeric keypad physical grouping of keys, containing numbers, in a block on a computer keyboard NOTE The numeric keypad
43、typically contains cursor control keys and is located on the right side of a computer keyboard. 2.7 open captioning constant display of dialogue, narration and sound effects of a video programme as words on a television screen c.f. closed captioning (2.1) NOTE Similar to subtitled movies, open capti
44、oning constantly presents text information to the viewer. 2.8 pointer icon icon that is logically attached to a physical input device, and that the user manipulates to interact with other screen elements ISO/IEC 11581-1:2000 NOTE For further information on pointer icons, see ISO/IEC 11581-3:2000. 2.
45、9 serial key device device used to input data in sequential order EXAMPLE Computer keyboard. 2.10 sign “words” of a sign language produced by actions of the hands, arms, torso, face and head that produce signals perceived visually NOTE 1 Sign languages are not universal; they have developed spontane
46、ously and independently within communities of deaf users all over the world. NOTE 2 For deaf-blind singers, a sign language is perceived through touch. 2.11 signing convention of gestures (“signs”) used instead of speaking to convey information SANS 19765:2009This s tandard may only be used and prin
47、ted by approved subscription and freemailing clients of the SABS .ISO/IEC TR 19765:2007(E) ISO/IEC 2007 All rights reserved 32.12 sticky key logical setting that enables sequentially pressed keyboard keystrokes combined as a single input 2.13 telecommunications terminal point at which data can eithe
48、r enter or leave a system or communications network NOTE In data communications, a telecommunications terminal is a device, usually equipped with a keyboard and display device, capable of sending and receiving information. 3 Collection of icons and symbols 3.1 Presentation of icons and symbols Throu
49、ghout this clause, and where appropriate, the icons and symbols are displayed upon a squared grid (icons) or upon a matrix (standardized symbols). In addition, the icons are also displayed approximately actual size alongside the enlarged (and gridded) version. 3.2 General icons and symbols 3.2.1 Accessibility options software Primary domain: IT software centre, typically used for the theatre 6; right, Voiceprint Canada 9. NOTE 1 These are examples of symbols currently in use and not ISO/IEC recommendations.
