SANS 20011-1981 Uniform provisions concerning the approval of vehicles with regard to door latches and door retention components《关于就门锁和车门保持件方面批准车辆的统一规定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JEITA EDR7315B-2006 Design guide for semiconductor packages ball grid array(BGA)《半导体包装件球栅阵列(BGA)用设计指南》.pdf

JEITA EDR7714-2008 Design guideline of clamshell type socket for ball grid array and land grid array (BGA LGA) .pdf

JEITA EM-3510-2007 Edge Roll-Off Measurement Method for Silicon Wafers 《硅晶片用边缘转降测定方法》.pdf

JEITA EM3603B-2006 Standard of SOI wafers and metrology 《SOI晶片标准和度量衡学》.pdf

JEITA ET2303B-2008 Graphic symbols for cable television systems .pdf

JEITA ET7501-105-2006 Land pattern design guideline for surface mount devices Sectional requirements （Chip carriers with J-Leads on four sides)《表面安装装置用地面类型设计指南(四个方向带有J字头的晶片载体)》.pdf

JEITA ETR 7023-2007 Second-generation Flow Solder Alloy Standardization Project Group Activity Report .pdf

JEITA ETR 7024-2007 Research Report on Effect of Voids on Reliability of Lead-Free Solder Joints and Standard of Evaluation Criteria.pdf

JEITA ETR-7029-2017 Survey and Evaluation of some alternative Lead-free solders for high melting temperature Lead containing solders.pdf