SANS 5186-2006 Alkaline salt content of scouring compounds《清洗复合物中的碱性盐含量》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DS EN 2082-2-1990 Aerospace series Aluminium alloy forging stock and forgings Technical specification Part 2 Forging stock《航空与航天 铝合金锻坯和锻件 交货技术条件 第2部分 锻坯》.pdf

DS EN 2082-3-1990 Aerospace series Aluminium alloy forging stock and forgings Technical specification Part 3 Pre production and production forgings《航空与航天 铝合金锻坯和锻件 交货技术条件 第3部分 不合格样品.pdf

DS EN 2093-1992 Aerospace series Aluminium alloy AL-P7009-T74 Hand forgings 20 mm a 150 mm《航空航天系列 铝合金AL-P7009-T74 手工锻材20 mm≤a≤150 mm》.pdf

DS EN 2094-1992 Aerospace series Aluminium alloy AL-P7009-T74 Die forgings 3 mm a 150 mm《航空航天系列 铝合金AL-P7009-T74 模锻件3 mm≤a≤150 mm》.pdf

DS EN 2100-1992 Aerospace series Aluminium alloy AL-P2014A-T4511 Extruded bars and sections a or D 200 mm《航空航天系列 铝合金AL-P2014-T4511 挤压棒材或型材a或D≤200 mm》.pdf

DS EN 2101-1991 Aerospace series Chromic acid anodizing of aluminium and wrought aluminium alloys《航空航天系列 铝和锻铝合金的铬酸阳极化》.pdf

DS EN 2103-3-1993 Aerospace series Steel nickel base and cobalt base alloy remelting stock and castings Technical specification Part 3 Pre-production and production castings《航空航天系列.pdf

DS EN 2126-1992 Aerospace series Aluminium alloy AL-P7075-T651 Plates 6 mm a 80 mm《航空航天系列 铝合金AL-P7075-T651 板材6 mm≤a≤80 mm》.pdf

DS EN 2127-1992 Aerospace series Aluminium alloy AL-P7075-T73511 Extruded bars and sections a or D 100 mm《航空航天系列 铝合金AL-P7075-T73511 挤压棒材或型材a或D≤100 mm》.pdf