SANS 5856-2006 Bulking of fine aggregates《集料中细骨料的湿涨性》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M4D713-A2-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 4% MINERAL FILLED HIGH IMPACT PAINTABLE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D952-A3)《.pdf

FORD WSB-M4D713-A3-2005 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) POST INDUSTRIAL REPROCESSED MINERAL FILLED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用工业.pdf

FORD WSB-M4D723-A-2010 POLYVINYL CHLORIDE (PVC) FLEXIBLE FOAMED EXTRUSION TO BE USED WITH FORD WSS-M99P1111-A 《柔性泡沫挤压聚氯乙烯（PVC） 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M4D724-A4-2013 STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER RUBBER MODIFIED MOLDING COMPOUND 20% GLASS FIBER REINFORCED BLEND WITH 10% MAXIMUM PMMA REGRIND AND 20% MAXIMUM REC-M.pdf

FORD WSB-M4D732-A3-2012 POLYPROPYLENE (PP) HOMOPOLYMER 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M4D732-A4-2013 POLYPROPYLENE (PP) HOMOPOLYMER GLASS FIBER MICA REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M4D733-A3-2010 ETHYLENE VINYL ACETATE (E VAC) COPOLYMER MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《外部乙烯醋酸乙烯酯(E VAC)共聚物模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSB-M4D733-A4-2010 ETHYLENE VINYL ACETATE (E VAC) COPOLYMER MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《外部乙烯醋酸乙烯酯(E VAC)共聚物模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSB-M4D734-A-2005 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MOLDING COMPOUND PAINTED APPLICATIONS TO BE USED WITH FORD WSS-M99P1111-A 《涂漆用途用热塑性聚烯径（TEO）弹性体成型料 与标准FORD WSS-M99.pdf