SANS 5991-2004 Guidelines for the spray-testing of timber specimens《木材样本盐雾试验规范》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AMS 4981H-2017 Titanium Alloy Bars Wire and Forgings 6 0Al - 2 0Sn - 4 0Zr - 6 0Mo Solution and Precipitation Heat Treated (UNS R56260).pdf

SAE AMS 4982F-2015 Titanium Alloy Wire 44 5 Cb (UNS R58450).pdf

SAE AMS 4983F-2015 Titanium Alloy Forgings 10V - 2Fe - 3Al Consumable Electrode Melted Single-Step Solution Heat Treated and Aged 180 ksi (1241 MPa) Tensile Strength (UNS R56410).pdf

SAE AMS 4984F-2015 Titanium Alloy Forgings 10V - 2Fe - 3Al Consumable Electrode Melted Solution Heat Treated and Aged 173 ksi (1193 MPa) Tensile Strength (UNS R56410).pdf

SAE AMS 4985E-2014 Titanium Alloy Investment Castings 6Al - 4V 130 UTS 120 YS 6% EL Hot Isostatically Pressed Anneal Optional or When Specified (UNS R56401)《可选型热均衡加压退火或指定的6Al-4V 13.pdf

SAE AMS 4986E-2015 Titanium Alloy Forgings 10V - 2Fe - 3Al Consumable Electrode Melted Single-Step Solution Heat Treated and Overaged 160 ksi (1103 MPa) Tensile Strength (UNS R5641.pdf

SAE AMS 4987E-2015 Titanium Alloy Forgings 10V - 2Fe - 3AI Consumable Electrode Melted Single-Step Solution Heat Treated and Overaged 140 ksi (965 MPa) Tensile Strength (UNS R56410.pdf

SAE AMS 4988C-2014 Titanium Alloy Sheet Strip and Plate 6Al - 6V - 2Sn Solution Heat Treated (UNS R56620)《溶解热处理的6Al - 6V - 2Sn钛合金薄板材 带材以及板材》.pdf

SAE AMS 4989C-2014 Titanium Alloy Sheet Strip and Plate 3Al - 2 5V Annealed (UNS R56320)《退火的3Al - 2 5V钛合金薄板材 带材以及板材》.pdf