SANS 60273-1990 Characteristics of indoor and outdoor post insulators for systems with nominal voltages greater than 1 000 V《标称电压超过1000V的系统用室内和室外柱状绝缘子的特性》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M15P36-A-2011 PERFORMANCE INNER DOOR WATERSHIELD WITH PRESSURE SENSITIVE ADHESIVE TO BE USED WITH FORD WSS-M99P1111-A 《带有压敏材料粘合剂的内部门防水罩性能 与福特WSS-M99P1111-A 一起使用[使用 福特W.pdf

FORD WSB-M15P38-A-2008 HEADLINER INTEGRAL AIR DUCT TO BE USED WITH FORD WSS-M99P1111-A 《带完整风道的顶棚(与 WSS-M99P1111-A号福特材料一起使用)》.pdf

FORD WSB-M15P40-A-1992 PERFORMANCE NETTING ASSEMBLY INTERIOR MULTIPURPOSE《汽车内部用多用网状物组件的性能［替代 FORD ESB-M6H30-A FORD ESB-M6H30-B］》.pdf

FORD WSB-M15P41-A-2013 PERFORMANCE REQUIREMENTS HOOD ASSEMBLY CONVERTIBLE TOP DUST COVER TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M15P42-A-2013 PERFORMANCE CHILD SEAT LINER FABRIC - FOAM LAMINATED COMPOSITE WITH HOT STAM LABEL TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M15P43-A-2010 PERFORMANCE HEADREST BLOW MOLDED FOAM INJECTED TO BE USED WITH FORD WSS-M99P1111-A 《泡沫喷注吹塑头靠的性能 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M15P39-B］》.pdf

FORD WSB-M16J16-A-2012 PAINT WATERBORNE 2 COMPONENT COMPLIANCE VOC PLASTICS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M17H164-A-2006 PADDING POLYURETHANE (PUR) SLAB POLYETHYLENE FILM COATED CONTROLLED CELL SIZE TO BE USED WITH FORD WSS-M99P1111-A 《孔尺寸控制的聚乙烯薄膜涂层的板状聚氨酯(PUR)衬垫 与标准FORD WSS.pdf

FORD WSB-M17H165-A-2006 INSULATOR COMPOSITE ARAMID POLYESTER ALUMINUM FOIL POLYESTER ALUMINUM FOIL TO BE USED WITH FORD WSS-M99P1111-A 《芳族聚酰胺 聚酯、铝箔、聚酯和铝箔复合材料绝缘体 与标准FORD WSS-M99P.pdf