1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21789-1 SANS 60730-2-19:2008 Edition 1.2 IEC 60730-2-19:2007 Edition 1.2SOUTH AFRICAN NATIONAL STANDARD Automatic electrical controls for
4、household and similar use Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements This national standard is the identical implementation of IEC 60730-2-19:2007 and is adopted with the permission of the International Electrotechnical Commission. WARN
5、ING Can only be used in conjunction with SANS 60730-1. Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa This standard may only be used and printed by
6、approved subscription and freemailing clients of the SABS.SANS 60730-2-19:2008 Edition 1.2 IEC 60730-2-19:2007 Edition 1.2 Table of changes Change No. Date Scope IEC amdt 1 2000 Amended to include electric actuators in combination with oil valves in the standard, to add definitions, to add requireme
7、nts for heating and for threaded parts connections, and to change requirements for abnormal operation and electronic controls. IEC amdt 2 2007 Amended to extend the scope, to update normative references, to add clause numbers to the list of national deviations in some countries, to classify normally
8、 open valves as automatic and semi-automatic with latch, to add requirements for normally open valves and electromagnetic compatibility, to change the titles of clauses 20, 23 and 26, to add maximum winding temperatures for impedance protected motorized electric actuators, to change the requirements
9、 for normally closed valves and for safety shutoff valves, the overvoltage and undervoltage test, and the use of electronic disconnection.National foreword This South African standard was approved by National Committee StanSA TC 72, Safety of electrical appliances and electronic equipment, in accord
10、ance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in August 2008. This SANS document supersedes SANS 60730-2-19:2007 (edition 1.1 as modified by IEC amdt 2:2007). This standard may only be used and printed by approve
11、d subscription and freemailing clients of the SABS. IEC 60730-2-19 Edition 1.2 2007-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Automatic electrical controls for household and similar use Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements Di
12、spositifs de commande lectrique automatiques usage domestique et analogue Partie 2-19: Rgles particulires pour les lectrovannes de combustible liquide, y compris les prescriptions mcaniques INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE CG ICS 97.120 PRICE CODE
13、CODE PRIX ISBN 2-8318-9328-3 SANS 60730-2-19:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS. 2 60730-2-19 IEC:1997+A1:2000 +A2:2007 CONTENTS FOREWORD.3 1 Scope and normative references.5 2 Definitions 6 3 General requirements .9 4 General
14、notes on tests9 5 Rating.10 6 Classification10 7 Information .12 8 Protection against electric shock.14 9 Provision for protective earthing14 10 Terminals and terminations.14 11 Constructional requirements .15 12 Moisture and dust resistance 19 13 Electric strength and insulation resistance.19 14 He
15、ating.19 15 Manufacturing deviation and drift 20 16 Environmental stress 21 17 Endurance21 18 Mechanical strength22 19 Threaded parts and connections .23 20 Creepage distances, clearances and distances through solid insulation.23 21 Resistance to heat, fire and tracking .23 22 Resistance to corrosio
16、n 23 23 Electromagnetic compatibility (EMC) requirements emission 23 24 Components .23 25 Normal operation 24 26 Electromagnetic compatibility (EMC) requirements immunity 24 27 Abnormal operation.24 28 Guidance on the use of electronic disconnection .26 Annexes27 Figures 26 Table 27.2.101 Maximum wi
17、nding temperature (for test of blocked output conditions and valves declared under table 7.2, requirement 110) 25 SANS 60730-2-19:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS.60730-2-19 IEC:1997+A1:2000 3 +A2:2007 INTERNATIONAL ELECTROTE
18、CHNICAL COMMISSION _ AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization
19、comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International
20、Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this
21、preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two o
22、rganizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the f
23、orm of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpre
24、tation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or
25、regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this
26、 publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indi
27、rect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for th
28、e correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60730-2-19 has been p
29、repared by IEC technical committee 72: Automatic controls for household use. This consolidated version of IEC 60730-2-19 consists of the first edition (1997) documents 72/350/FDIS/ and 72/373/RVD, its amendment 1 (2000) documents 72/467/FDIS and 72/491/RVD and its amendment 2 (2007) documents 72/745
30、/FDIS and 72/750/RVD. The technical content is therefore identical to the base edition and its amendments and has been prepared for user convenience. It bears the edition number 1.2. A vertical line in the margin shows where the base publication has been modified by amendments 1 and 2. SANS 60730-2-
31、19:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS. 4 60730-2-19 IEC:1997+A1:2000 +A2:2007 This Part 2-19 is intended to be used in conjunction with IEC 60730-1. It was established on the basis of the third edition of that standard (1999) a
32、nd its amendment 1 (2003). Consideration may be given to future editions of, or amendments to IEC 60730-1. This part 2 supplements or modifies the corresponding clauses in IEC 60730-1, so as to convert that publication into the IEC standard: Particular requirements for electrically operated oil valv
33、es, including mechanical requirements. This publication has been drafted in accordance with the ISO/IEC Directives, Part 3. Where this part 2 states “addition“, “modification“ or “replacement“, the relevant requirement, test specification or explanatory matter in part 1 should be adapted accordingly
34、. Where no change is necessary, part 2 indicates that the relevant clause or subclause applies. In the development of a fully international standard it has been necessary to take into consideration the differing requirements resulting from practical experience in various parts of the world and to re
35、cognize the variation in national electrical systems and wiring rules. The “in some countries” notes regarding differing national practice are contained in the following subclauses: Table 7.2, requirement 120 Table 7.2, note 102 11.103 11.105.1 11.105.2 11.113 18.102 27.2.101.1 H.26.10 In this publi
36、cation: 1) The following print types are used: requirements proper: in roman type; test specifications: in italic type; explanatory matter: in smaller roman type. 2) Subclauses, notes or items which are additional to those in part 1 are numbered starting from 101. The committee has decided that the
37、contents of the base publication and its amendments will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised
38、 edition, or amended. SANS 60730-2-19:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS.60730-2-19 IEC:1997+A1:2000 5 +A2:2007 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE Part 2-19: Particular requirements for electrically ope
39、rated oil valves, including mechanical requirements 1 Scope and normative references This clause of part 1 is not applicable. Replacement: 1.1 This part 2 of IEC 60730 applies to electrically operated oil valves for use in, on or in association with equipment for household and similar use that use e
40、lectricity, in combination with fuel in the liquid state such as distillates, residual fuels, etc. This part 2 also applies to electrically operated oil valves using NTC or PTC thermistors, requirements for which are contained in annex J. 1.1.1 This standard applies to the inherent safety, to the op
41、erating values, operating times, and operating sequences where such are associated with equipment safety, and to the testing of electrically operated oil valves used in, or in association with, household or similar equipment, but also extended to industrial purposes where no dedicated product standa
42、rd exists, such as that for central heating, air conditioning, process heating, etc. This part 2 is also applicable to controls for appliances within the scope of IEC 60335-1. Throughout this part 2 the word “equipment“ means “appliance and equipment“. This part 2 does not apply to electrically oper
43、ated oil valves designed exclusively for industrial applications. Electrically operated oil valves for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in light industry and on farms, are with
44、in the scope of this part 2. This part 2 identifies a number of mechanical features as “under consideration“. Until these mechanical requirements are incorporated in this part 2, each country using this part 2 will have to quantify these requirements. Compliance of an electrically operated oil valve
45、 with this part 2 does not imply that the valve is acceptable without further tests for these mechanical features. 1.1.2 This part 2 applies to manual controls when such are electrically and/or mechanically integral with electrically operated oil valves. Requirements for manual switches not forming
46、part of an electrically operated oil valve are contained in IEC 61058-1. This part 2 does not apply to electrically operated oil valves of nominal connection size above DN 150. Hereinafter, the term “valve“ is used to denote an electrically operated oil valve (including prime mover and valve body).
47、SANS 60730-2-19:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS. 6 60730-2-19 IEC:1997+A1:2000 +A2:2007 1.1.3 An electric actuator that is submitted to the testing laboratory in combination with an oil valve will be evaluated under this par
48、t 2. A separate electric actuator is evaluated under IEC 60730-2-14, which provides particular requirements for electric actuators. 1.1.4 This part 2 also applies to valves utilized as part of a system, or valves mechanically integral with multifunctional controls. 1.5 Normative references This clau
49、se of part 1 is applicable except as follows: Addition: IEC 60730-2-14:2001, Automatic electrical controls for household and similar use Part 2: Particular requirements for electric actuators ISO 7-1:1994, Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation ISO 228-1:2000, Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation ISO 274:1975, Copper tubes of circul
