1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-23270-2 SANS 60745-2-11:2009Edition 2.1IEC 60745-2-11:2008Edition 2.1 SOUTH AFRICAN NATIONAL STANDARD Hand-held motor-operated electric to
4、ols Safety Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) This national standard is the identical implementation of IEC 60745-2-11:2008 and is adopted with the permission of the International Electrotechnical Commission. WARNING Can only be used in conjunction with SA
5、NS 60745-1. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof g13 Private Bag X191 Pretoria 0001Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za g148 SABS SANS 60745-2-11:2009 Edition 2.1 IEC 60745-2-11:2008 Edition 2.1 Table of changes Change No. Date Scope IEC amdt 1 2008 A
6、mended to cover the safety of jig and sabre saws, to change the terms and definitions, to change the text on marking and instructions, to add figures depicting the typical designs of jig and sabre saws, to replace the text on mechanical hazards, and to change annexes K and L. National foreword This
7、South African standard was approved by National Committee SABS TC 72, Safety of electrical appliances and electronic equipment, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document, by reference, forms part of the Compu
8、lsory specification for electrical and electronic apparatus, as published by Government Notice No. R. 89 (Government Gazette 31844) of 6 February 2009. This SANS document was published in December 2009. This SANS document supersedes SANS 60745-2-11:2003 (edition 2). IEC 60745-2-11Edition 2.1g2 2008-
9、07INTERNATIONAL STANDARD NORME INTERNATIONALEHand-held motor-operated electric tools Safety Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) Outils lectroportatifs moteur Scurit Partie 2-11: Rgles particulires pour les scies alternatives (scies sauteuses et scies sabres
10、) INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE CBICS 25.140.20 PRICE CODECODE PRIXISBN 2-8318-9867-6 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale SANS 60745-2-11:2009 2 6074
11、5-2-11 IEC:2003+A1:2008 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS SAFETY Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardiz
12、ation comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes Internat
13、ional Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in
14、 this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
15、two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have
16、the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misint
17、erpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding nationa
18、l or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of
19、 this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or
20、 indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable f
21、or the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60745-2-11 has b
22、een prepared by subcommittee 61F: Safety of hand-held motor-operated electric tools, of IEC technical committee 61: Safety of household and similar electrical appliances Main changes include Clause 3: Definitions, introducing detailed definitions for the tools in the scope of this part 2, and Clause
23、 19: Mechanical hazards, introducing requirements for guarding the saw blades. Subclause 2.2.23 has been removed, as the definitions of “normal load” are now generally covered by Part 1. This consolidated version of IEC 60745-2-11 consists of the second edition (2003) documents 61F/466/FDIS and 61F/
24、490/RVD and its amendment 1 (2008) documents 61F/736/FDIS and 61F/756/RVD. The technical content is therefore identical to the base edition and its amendment and has been prepared for user convenience. SANS 60745-2-11:2009 60745-2-11 IEC:2003+A1:2008 3 It bears the edition number 2.1. A vertical lin
25、e in the margin shows where the base publication has been modified by amendment 1. The French version of this standard has not been voted upon. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This Part 2-11 is to be used in conjunction with the third edition of I
26、EC 60745-1: Safety of hand-held motor-operated electric tools Part 1: General requirements. When this standard states “addition”, “modification” or “replacement”, the relevant text in Part 1 is to be adapted accordingly. With amendment 1, this part 2 is established on the basis of the fourth edition
27、 (2006) of IEC 60745-1, Hand-held motor-operated electric tools Safety Part 1: General requirements. Main changes include editorial modifications to match with the fourth edition of IEC 60745-1, addition of a new safety warning to Clause 8: Marking and instructions, and clarifications in Annex K. NO
28、TE In this standard, the following print types are used: requirements: in roman type; test specifications: in italic type; notes: in smaller roman type. Subclauses, tables and figures which are additional to those in Part 1 are numbered starting from 101; additional annexes are lettered AA, BB, etc.
29、 IEC 60745 consists of the following parts, under the general title Hand-held motor-operated electric tools Safety: Part 1: General requirements Part 2-1: Particular requirements for drills and impact drills Part 2-2: Particular requirements for screwdrivers and impact wrenches Part 2-3: Particular
30、requirements for grinders, polishers and disk-type sanders Part 2-4: Particular requirements for sanders and polishers other than disk type Part 2-5: Particular requirements for circular saws and circular knives Part 2-6: Particular requirements for hammers Part 2-7: Particular requirements for spra
31、y guns for non-flammable liquids Part 2-8: Particular requirements for shears and nibblers Part 2-9: Particular requirements for tappers Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) Part 2-12: Particular requirements for concrete vibrators Part 2-13: Particular requ
32、irements for chain saws Part 2-14: Particular requirements for planers Part 2-15: Particular requirements for hedge trimmers Part 2-16: Particular requirements for tackers Part 2-17: Particular requirements for routers and trimmers Part 2-18: Particular requirements for strapping tools Part 2-19: Pa
33、rticular requirements for jointers Part 2-20: Particular requirements for band saws Part 2-21: Particular requirements for drain cleaners SANS 60745-2-11:2009 4 60745-2-11 IEC:2003+A1:2008 The committee has decided that the contents of the base publication and its amendments will remain unchanged un
34、til the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. SANS 60745-2-11:2009 60745-2-11 IEC:2003+A1:2008 5 HAN
35、D-HELD MOTOR-OPERATED ELECTRIC TOOLS SAFETY Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) 1 Scope This clause of Part 1 is applicable, except as follows: Addition: This standard applies to reciprocating saws such as jig saws and sabre saws. 2 Normative references Thi
36、s clause of Part 1 is applicable. 3 Terms and definitions This clause of Part 1 is applicable, except as follows: Additional definitions: 3.101 reciprocating saw tool intended for cutting various material with a blade or blades acting in a reciprocating or oscillating motion 3.102 jigsaw reciprocati
37、ng saw with a base plate that may allow bevel adjustments NOTE Typical designs of jigsaws are shown in Figure 102. 3.103 sabre saw reciprocating saw with a guide plate that may allow tilting movements NOTE Typical designs of sabre saws are shown in Figure 103. 4 General requirements This clause of P
38、art 1 is applicable. 5 General conditions for the tests This clause of Part 1 is applicable. SANS 60745-2-11:2009 6 60745-2-11 IEC:2003+A1:2008 6 Void 7 Classification This clause of Part 1 is applicable. 8 Marking and instructions This clause of Part 1 is applicable, except as follows: 8.12.1.1 Add
39、ition: Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a “live“ wire may make exposed metal parts of the power tool “live“ and could give the operator an electric shock. 9
40、 Protection against access to live parts This clause of Part 1 is applicable. 10 Starting This clause of Part 1 is applicable. 11 Input and current This clause of Part 1 is applicable. 12 Heating This clause of Part 1 is applicable. 13 Leakage current This clause of Part 1 is applicable. 14 Moisture
41、 resistance This clause of Part 1 is applicable. 15 Electric strength This clause of Part 1 is applicable. 16 Overload protection of transformers and associated circuits This clause of Part 1 is applicable. SANS 60745-2-11:2009 60745-2-11 IEC:2003+A1:2008 7 17 Endurance This clause of Part 1 is appl
42、icable. 18 Abnormal operation This clause of Part 1 is applicable. 19 Mechanical hazards This clause of Part 1 is applicable except as follows: 19.1 Replacement: a) For jig saws A guard shall be provided to prevent inadvertent contact with the cutting edge of the saw blade above the base plate. Comp
43、liance is checked by inspection and the following test. The jig saw is set for the right-angled cut. The test probe of Figure 101a) is positioned above the base plate as shown in Figure 101b) and Figure 101c). The longitudinal axis of the test probe shall be perpendicular to the toothed edge of the
44、saw blade. The test probe shall be equally shared about the central plane of the saw blade. When the test probe is moved towards the saw blade, it shall not be able to touch its toothed edge. b) For other types of reciprocating saws If a reciprocating saw is designed with a grip zone adjacent and be
45、hind the reciprocating saw blade, a barrier shall be provided to prevent inadvertent contact with the saw blade. The barrier shall have a minimum height of 6 mm as measured from the grip surface and be located between the grip zone and the saw blade. A barrier is not required if the tool is supplied
46、 with an auxiliary front handle. Compliance is checked by inspection and measurement. 20 Mechanical strength This clause of Part 1 is applicable. 21 Construction This clause of Part 1 is applicable. 22 Internal wiring This clause of Part 1 is applicable. 23 Components This clause of Part 1 is applic
47、able. SANS 60745-2-11:2009 8 60745-2-11 IEC:2003+A1:2008 24 Supply connection and external flexible cords This clause of Part 1 is applicable. 25 Terminals for external conductors This clause of Part 1 is applicable. 26 Provision for earthing This clause of Part 1 is applicable. 27 Screws and connec
48、tions This clause of Part 1 is applicable. 28 Creepage distances, clearances and distances through insulation This clause of Part 1 is applicable. 29 Resistance to heat, fire and tracking This clause of Part 1 is applicable. 30 Resistance to rusting This clause of Part 1 is applicable. 31 Radiation,
49、 toxicity and similar hazards This clause of Part 1 is applicable. SANS 60745-2-11:2009 60745-2-11 IEC:2003+A1:2008 9 5012r =6aa) Details of test probe abNOTE Upper structure of saw, which should prevent the test probe touching the saw blade, omitted for simplicity. b) Side section showing position and direction of movement of test probe ba=a = Test probe NOTE Upper structure of saw omitted for simplicity. b = Guide plate c) Plan view of guide plate showing position of
