SANS 6083-2004 Modulus of elasticity and modulus of rupture in static bending of solid timber and glued laminated timber in structural sizes《构筑物中实心木料和多层胶合木料的静弯曲弹性模量和断裂模量》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AMS 6373H-2016 Steel Welded Tubing 0 95Cr - 0 20Mo (0 28 - 0 33C) (SAE 4130) (UNS G41300).pdf

SAE AMS 6374D-2016 Steel Tubing Seam-Free Round 0 95Cr - 0 20Mo (0 28 - 0 33C) (SAE 4130) 95 0 ksi (655 MPa) Tensile Strength (UNS G41300).pdf

SAE AMS 6375D-2016 Steel Welding Wire 0 50Cr - 0 55Ni - 0 20Mo (0 18 - 0 23C) (SAE 8620) Vacuum Melted Environment Controlled Packaging (UNS G86200).pdf

SAE AMS 6378G-2014 Steel Bars 1 0Cr - 0 20Mo - 0 45Se (0 39 - 0 48C) (4142H Modified) Die-Drawn 130 ksi (896 MPa) Yield Strength Free Machining (UNS K11542)《抗拉强度为130 ksi (896 MPa) .pdf

SAE AMS 6381J-2017 Steel Mechanical Tubing 0 95Cr - 0 20Mo (0 38 - 0 43C) (SAE 4140) (UNS G41400).pdf

SAE AMS 6382P-2014 Steel Bars Forgings and Rings 0 95Cr - 0 20Mo (0 38 - 0 43C) (SAE 4140) Annealed (UNS G41400)《0 95Cr-0 20Mo(0 38-0 43C)(SAE 4140)煅烧的钢棒、钢铸件和钢环》.pdf

SAE AMS 6385K-2015 Steel Sheet Strip and Plate Low Alloy Heat-Resistant 0 65Si - 1 25Cr - 0 50Mo - 0 25V (0 27 - 0 33C) (UNS K23015).pdf

SAE AMS 6387B-2013 Steel Carbon Laminated Sheet Surface Bonded《表面结合层压板碳素钢》.pdf

SAE AMS 6395H-2015 Steel Sheet Strip and Plate 0 95Cr - 0 20Mo (0 38 - 0 43C) (SAE 4140) (UNS G41400).pdf