SANS 6178-2004 Fibreboard - Determination of lateral nail-holding strength《纤维板 侧面钉力的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AECMA PREN 2394-1983 Aluminium Alloy 7075-T6511 Bars and Sections A Less Than or Equal to 125 mm Aerospace Series Edition 1《航空和航天系列铝合金7075-T6511棒材和板材A小于或等于125mm.第1版》.pdf

AECMA PREN 2395-2003 Aerospace Series Aluminium Alloy AL-P2014A T4 or T42 Sheet and Strip 0 4 mm Less Than or Equal to a Less Than or Equal to 6 mm Edition P 1《航空和航天系列铝合金AL-P2014A .pdf

AECMA PREN 2396-1980 Heat Resisting Nickel Base Alloy NI-P95-HT Cold Worked Solution Treated and Precipitation Treated Bars for Machined Bolts D Less Than or Equal to 25 mm Aerospa.pdf

AECMA PREN 2397-1980 Heat Resisting Nickel Base Alloy NI-P95-HT Cold Worked Solution Treated and Precipitation Treated Bars for Forged bolts D Less Than or Equal to 25 mm Aerospace.pdf

AECMA PREN 2398-1993 Aerospace Series Heat Resisting Alloy FE-PA2601 Softened Cold Worked Solution Treated Precipitation Treated Bars for Machined Fastners D Less Than or Equal to .pdf

AECMA PREN 2399-1980 Heat Resisting Steel FE-PA92-HT Rm Greater Than or Equal to 900 MPa Bars for Forged Bolts D Less Than or Equal to 25 mm Aerospace Series Edition 1《航空和航天系列耐热钢FE.pdf

AECMA PREN 2400-1980 Heat Resisting Nickel Base Alloy NI-P96-HT Cold Drawn and Precipitation Treated Wires D Less Than or Equal to 10 mm Aerospace Series Edition 1《航空和航天系列抗热镍基合金 NI.pdf

AECMA PREN 2401-1980 Heat Resisting Nickel Base Alloy NI-P96-HT Solution Treated and Precipitation Treated Wires D Less Than or Equal to 10 mm Aerospace Series Edition 1《航空和航天系列抗热镍.pdf

AECMA PREN 2402-1980 Heat Resisting Nickel Base Alloy NI-P91-HT Annealed Wires D Less Than or Equal to 10 mm Aerospace Series Edition 1《航空和航天系列抗热镍基合金 NI-P91-HT退火线材 直径D小于或等于10mm.第1版.pdf