1、AMSC N/A Page 1 of 2 FSC 8455 MIL-DTL-3943/298A 1 May 2009 SUPERSEDING MIL-DTL-3943/298 4 April 2002 DETAIL SPECIFICATION SHEET DECORATION, EXCEPTIONAL CIVILIAN SERVICE, DEFENSE CONTRACT MANAGEMENT AGENCY This specification is approved for use by all Departments and Agencies of the Department of Def
2、ense. The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-3943. OBVERSE REVERSE MATERIAL: Red Brass FINISH: Oxidized, Relieved, and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 4. DIMENSIONS: H
3、EIGHT (including lug): 1-23/32 inches (REF) WIDTH: 1-9/16 inches (REF) THICKNESS (at thickest point): 0.135 0.010 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted w
4、ithout license from IHS-,-,-MIL-DTL-3943/298A PAGE 2 of 2 2. Decoration set shall consist of a regular size decoration and a lapel button, both packaged in a presentation case conforming to MIL-C-14633, Type VIII, Style 6, with a Class 1, 1A, or 3 pad. 3. The ribbon for the pendant drape shall confo
5、rm to MIL-DTL-11589/563. 4. The lapel button shall conform to MIL-DTL-11484/279. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activity: Army - IH Army - IH
6、Project No. 8455-2009-065) Review activities: DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
