SANS 9454-1-1990 Soft soldering fluxes - Classification and requirements Part 1 Classification labelling and packaging《软钎焊剂 分类和要求 第1部分：分类，标记和包装》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 16642-1980 Female dies with square hole Construction and dimensions《带方孔下模 结构及尺寸》.pdf

GOST 16643-1980 Quick-changing female dies with square hole Construction and dimensions《带方孔的快换阴模 结构和尺寸规格》.pdf

GOST 16644-1980 Female dies with oblong hole Construction and dimensions《带长方形孔的阴模 结构和尺寸规格》.pdf

GOST 16645-1980 Quick-changing female dies with oblong hole Construction and dimensions《带长方孔快速更换下模 结构及尺寸》.pdf

GOST 16646-1980 Female dies with elongated oblong hole Construction and dimensions《带加长长方孔下模 结构及尺寸》.pdf

GOST 16647-1980 Quick-changing female dies with elongated oblong hole Construction and dimensions《带加长长方孔快速更换的下模 结构及尺寸》.pdf

GOST 16648-1980 Holders with two mounting holes Construction and dimensions《带双固定孔模座 结构及尺寸》.pdf

GOST 16650-1980 Holders with four mounting holes Construction and dimensions《带四个固定孔模座 结构及尺寸》.pdf

GOST 16652-1980 Holders with rectangular slot Construction and dimensions《带矩形槽模座 结构及尺寸》.pdf