1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-23469-0 SANS 95-1:2009Edition 1EN 840-1:2004Edition 2SOUTH AFRICAN NATIONAL STANDARD Mobile waste containers Part 1: Containers with 2 whe
4、els with a capacity up to 400 l for comb lifting devices, dimensions and design This national standard is the identical implementation of EN 840-1:2004, and is adopted with the permission of CEN, rue de Stassart 36, B-1050 Brussels. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof P
5、rivate Bag X191 Pretoria 0001Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS SANS 95-1:2009 Edition 1 EN 840-1:2004 Edition 2 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee SABS TC 122, Packaging, in accordance wi
6、th procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in December 2009. EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 840-1March 2004ICS 13.030.40 Supersedes EN 840-1:1997English versionMobile waste containers - Part 1
7、: Containers with 2 wheels witha capacity up to 400 l for comb lifting devices, dimensions anddesignConteneurs roulants dchets - Partie 1: Conteneurs 2roues de capacit jusqu 400 l pour lve-conteneurs peigne - Dimensions et conceptionFahrbare Abfallsammelbehlter - Teil 1: Behlter mit 2Rdern und einem
8、 Nennvolumen bis 400 l frKammschttungen - Mae und FormgebungThis European Standard was approved by CEN on 10 December 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard witho
9、ut any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made
10、 by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Gree
11、ce, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue
12、 de Stassart, 36 B-1050 Brussels 2004 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 840-1:2004: ESANS 95-1:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .EN 840-1:2004
13、(E) 2 Contents page Foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Volumes 5 5 Dimensions and design 5 6 Nominal load 6 7 Safety and health requirements .6 8 Testing 6 9 Marking .6 10 Designation 7 Annex A (informative) Nomenclature . 12 Annex B (informative) Recommendati
14、ons for manufacturers of lifting devices . 16 Annex C (informative) A-Deviations . 17 SANS 95-1:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .EN 840-1:2004 (E) 3 Foreword This document (EN 840-1:2004) has been prepared by Technical Comm
15、ittee CEN/TC 183 “Waste management”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2004, and conflicting national standards shall be withdrawn
16、at the latest by September 2004. This document supersedes EN 840-1:1997. This European Standard is one part of the series of standards of EN 840 about “Mobile waste containers“ comprising the following parts: Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices Dimen
17、sions and design. Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices Dimensions and design. Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices Dimensions and
18、design. Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG and/or wide comb lifting device Dimensions and design. Part 5: Performance requirements and test methods. Part 6: Safety and health requirements. Annexes A, B and C are informative. Accor
19、ding to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuan
20、ia, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SANS 95-1:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .EN 840-1:2004 (E) 4 1 Scope This European Standard
21、specifies dimensions and design requirements of mobile waste containers with 2 wheels, with capacity up to 400 l to be used by comb lifting devices. 2 Normative references This European Standard incorporates, by dated or undated reference, provisions from other publications. These normative referenc
22、es are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the lat
23、est edition of the publication referred to applies (including amendments). EN 840-5, Mobile waste containers Part 5: Performance requirements and test methods. EN 840-6, Mobile waste containers Part 6: Safety and health requirements. EN 1501-1, Refuse collection vehicles and their associated lifting
24、 devices General requirements and safety requirements Part 1: Rear-end loaded refuse collection vehicles. EN ISO 11469, Plastics Generic identification and marking of plastics products (ISO 11469:2000). 3 Terms and definitions Terms for components of mobile waste containers and lifting devices in th
25、ree languages are given in annex A. For the purposes of this European Standard, the following terms and definitions apply. 3.1 mobile waste container appropriately designed container fitted with wheels intended to temporarily store waste 3.2 lifting device structure which picks-up, tilts and empties
26、 containers 3.3 comb lifting device lifting device in which the picking-up system consists of a row of teeth and a locking system to retain the container during emptying 3.4 volume total space inside the container when the lid is closed (see Table 1) 3.5 nominal volume volume stated by the manufactu
27、rer (see Table 1 without tolerances) 3.6 capacity for the purpose of this standard nominal volume and capacity are deemed to be the same SANS 95-1:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .EN 840-1:2004 (E) 5 NOTE The English term “
28、capacity“ and the French term “capacit“ are translated in the German version by the term “Nennvolumen“. 3.7 nominal load load mass, which is calculated as given in clause 6 3.8 total permissible mass mass of the container plus the nominal load 3.9 functional and safety dimensions essential dimension
29、s which ensure the functionality and interchangeability of the container with the compatible lifting device and which are necessary for the operators safety and health 4 Volumes This standard identifies the two classes of containers: Class I - small size (nominal volume up to 200 l); Class II - larg
30、e size (nominal volume between 200 l and 400 l). Within the two above-mentioned classes of containers the volumes shown in Table 1 are identified. Table 1 Volumes Volume in l 18580+125100+86120+130 7 612140+155210+155240+4025340+390 20 For methods of measuring capacity see EN 840-5. The volumes show
31、n in Table 1 correspond to mobile waste containers capacities at present used in Europe. Since there are some overlapping capacities due to the tolerances, client and manufacturer shall decide while ordering the capacity chosen. Nominal volumes different from those referenced in Table 1 can be used
32、by agreement between user and manufacturer. The tolerance of the volumes shall be 10 % maximum measured according to EN 840-5. 5 Dimensions and design 5.1 The design of the containers need not correspond to the drawings given in Figure 1. The functional dimensions given in Tables 2 and 3 shall be re
33、spected. Recommendations for manufacturers of lifting devices are given in annex B (see also EN 1501-1). 5.2 The container shall be constructed so that when it is unloaded or loaded with a nominal load (see clause 6), it fits on an approved compatible lifting device. It shall be automatically locked
34、 safely into the lifting device during the lifting operation. The frontal receiver shall correspond to one of the options given in Figure 2 (Form A, B or C). 5.3 The lid(s) shall fit the body. It/they shall be made with at least 2 fixing points and have at least one means of opening. SANS 95-1:2009T
35、his s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .EN 840-1:2004 (E) 6 5.4 Each wheel shall be capable of withstanding a static load of 100 kg. 5.5 All the surfaces of the container including design features shall be smooth and free of any foreig
36、n bodies or flaws. 5.6 The container shall be able to be immobilised by design. 6 Nominal load The container shall be constructed strongly enough to carry a load of 0,4 kg/dm3x nominal volume. 7 Safety and health requirements The container shall meet the safety and health requirements according to E
37、N 840-6. 8 Testing The container shall fulfil the performance requirements and the tests of EN 840-5. 9 Marking 9.1 Each container complying with the requirements of this European Standard shall be durably and readably marked on the body in a visible part with: number of this European Standard (EN 8
38、40-1); nominal volume; manufacturers name or trademark; total permissible mass, in kilograms; year and month of manufacturing. 9.2 Additional marking for quality, recycling, etc. is allowed. Beginning 5 years after the publication of this standard, plastic parts of containers, lids and wheels shall
39、be marked in accordance with EN ISO 11469. The use of recycled materials is allowed, presuming that all requirements of this standard are complied with. SANS 95-1:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .EN 840-1:2004 (E) 7 10 Desi
40、gnation The container complying with the requirements of this European Standard shall be designated as follows: Container EN 840-1 240 A 96 Description Standard number Nominal volume, in litres Frontal receiver form: A = frontal receiver form A B = frontal receiver form B C = frontal receiver form C
41、 Nominal load, in kilograms SANS 95-1:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .EN 840-1:2004 (E) 8 Table 2 Dimensions for containers from 80 l to 140 l Class I (up to 200 l) Dimensions in mm Dimen-sion N 80 l 100 l 120 l 130 l 140
42、l Remarks a b a b a b a1 448 5 480 5 472 5 505 max. 472 5 505 max. Total width of the container a2 448 5 480 5 472 5 390 10 480 5 472 5 390 10 480 5 Width of the frontal receiver 3 530 max. 555 max. 558 max. 555 max. 558 max. 555 max. 4 975 max. 1021 max. 1005 max. 1021 max. 1100 max. Total height i
43、ncluding handles on the lid a5 860 min.; 1030 max. 860 min.; 1030 max. 860 min.; 1030 max. 860 min.; 1030 max. 860 min.; 1030 max. 6 450 max. 490 max. 497 max. 490 max. 497 max. 490 max. 7 1010 max. 1090 max. 1010 max. 1090 max. 1155 max. 8 430 min.; 670 max. 430 min.; 670 max. 430 min.; 670 max. 43
44、0 min.; 670 max. 430 min.; 670 max. For 300 mm wheels, the maximum dimension is 70 mm more a9 410 max. 450 max. 440 10 440 10 440 10 450 max. 10 320 10 2025365+455 15 2025365+455 15 2025365+a11 195 min. 195 min. 195 min. 195 min. 195 min. Larger wheels accepted a12 19 min. 19 min. 19 min. 19 min. 19
45、 min. a13 625,4+625,4+625,4+625,4+625,4+a14 25 min. 25 min. 25 min. 25 min. 25 min. a15 5313+5313+5313+5313+5313+a16 2221+2221+2221+2221+2221+17 - - - - - This dimension is no more used. a18 26 1 26 1 26 1 26 1 26 1 a19 58 max. 58 max. 58 max. 58 max. 58 max. a20 20 min. 20 min. 20 min. 20 min. 20 m
46、in. a21 130 max. 130 max. 130 max. 130 max. 130 max. 22 15 max. 15 max. 15 max. 15 max. 15 max. a23 8033+8033+8033+8033+8033+a24 4057+4057+4057+4057+4057+25 230 12 - 279 5 270 12 279 5 270 12 Optional measurement a26 147 8 180 5 180 5 291 5 180 5 180 5 291 5 180 5 Compulsory dimensions when ribs are
47、 fitted, max. ribs thickness 6 mm 27 270 min. 270 min. 270 min. 270 min. 270 min. aCompulsory dimensions for functional and safety reasons. The other dimensions indicated are suggested recommended values. SANS 95-1:2009This s tandard may only be used and printed by approved subscription and freemail
48、ing clients of the SABS .EN 840-1:2004 (E) 9 Table 3 Dimensions for containers from 210 l to 400 l Class II ( 200 l) Dimensions in mm Dimension N 210 l 240 l 340 l 390 l Remarks a b a b a1 546 5 580 5 665 max. 745 5 Total width of the container a2 546 5 407 10 580 5 590 20 745515+660 10 Width of the
49、 frontal receiver 3 730 max. 740 max. 880 max. 810 max. 4 1095 max. 1100 max. 1115 max. 1095 max. Total height including handles on the lid a5 860 min.; 1030 max. 860 min.; 1030 max. 860 min.; 1030 max. 860 min.; 1030 max. 6 565 max. 590 max. 590 max. 775 max. 7 1180 max. 1190 max. 1250 max. 1200 max. 8 560 min.; 760 max. 560 min; 760 max. 560 min; 760 max. 560 min; 760 max.
