SEV 4014-1965 《机械师 锉半圆形和圆形锉刀》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 13185-2005 Medical instruments - Onychia forceps《医疗器械 拔指甲钳》.pdf

DIN 13186-2005 Medical instruments - Clip applying and removing forceps Michel-s《医疗器械 Michel夹持钳和拔取钳》.pdf

DIN 13187-2005 Medical instruments - Bone holding forceps type Semb《医疗器械 Semb型持骨钳》.pdf

DIN 13188-2010 Medical instruments - Plaster cast spreader type Henning《医疗器械 亨宁式石膏摊开器》.pdf

DIN 13189-2010 Medical instruments - Laminectomy punches type Ferris-Smith-Kerrison《医疗器械 费蓝-史密斯-克里封氏椎板切开术钻孔器》.pdf

DIN 1319-1-1995 Fundamentals of metrology - Part 1 Basic terminology《测量技术基础 第1部分 基本术语》.pdf

DIN 1319-2-2005 Fundamentals of metrology - Part 2 Terminology related to measuring equipment《计量学基础 第2部分 与测量设备相关的术语》.pdf

DIN 1319-3-1996 Fundamentals of metrology - Part 3 Evaluation of measurements of a single measurand measurement uncertainty《计量基础 第3部分 单一测量值测量、测量误差评价》.pdf

DIN 1319-4-1999 Fundamentals of metrology - Part 4 Evaluation of measurements uncertainty of measurement《计量学的基本知识 第4部分 测量评估 测量的不定度》.pdf