SFS 4078-1977 《焊接 不同于水洗或浇铸的焊接螺纹 长度公差》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 1034-21-2012 en Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 21 Coating machines《机械安全 造纸机械和精整机设计和结构的安全.pdf

EN 1034-22-2005 en Safety of machinerie - Safety requirements for the design and construction of paper making and finishing machines - Part 22 Wood Grinders (Incorporates Amendment.pdf

EN 1034-26-2012 en Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 26 Roll packaging machines《机械安全-安全要求造纸完成机.pdf

EN 1034-27-2012 en Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27 Roll handling systems《机械安全 造纸机械和修整机设计和.pdf

EN 1034-3-2011 en Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3 Rereelers and winders《机械安全-安全要求造纸完成机器的设计.pdf

EN 1034-4-2005 en Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4 Pulpers and their loading facilities (In.pdf

EN 1034-5-2005 en Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5 Sheeters (Incorporates Amendment A1 2009.pdf

EN 1034-6-2005 en Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6 Calender (Incorporates Amendment A1 2009.pdf

EN 1034-7-2005 en Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7 Chests (Incorporates Amendment A1 2009)《.pdf