SFS 5178 E-1985 This standard is approved in English《自动火情探测系统组件 第8部分：高温热探测器规范》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 7816-4-1994 Rims for motorcycles and motor-scooters part 4 divided rims (two-piece rims with divided disk)《摩托车和小型摩托车轮缘 第4部分 组合轮缘(带分离轮盘的两件式轮缘)》.pdf

DIN 7817-1-1990 Rims for motor vehicles and trailers rims with flange J JK and K without bead retaining contour《汽车和挂车轮辋 带无卷边锁紧外形的J、JK、K型轮缘的轮辋》.pdf

DIN 7817-2-1990 Rims for motor vehicles and trailers flange J JK and K hump types《汽车和挂车的轮辋 J、JK和K型轮缘 驼峰型》.pdf

DIN 7817-3-1979 Rims for motor vehicles and trailers hump special types《机动车辆和挂车轮缘 第3部分 特种驼峰型》.pdf

DIN 7818-1982 Rims for motor vehicles trailers and agricultural vehicles flange C D E and F rim diameter code 14 to 20《汽车、挂车和农用车的轮圈 C D E和F型凸缘 轮圈直径代码为14至20》.pdf

DIN 7820-1996 5 tapered rims for trucks buses and trailers - Rim-diameter-code 15 20 and 24《汽车和挂车的斜肩轮圈 轮圈直径代码 15、20和24》.pdf

DIN 7821-1982 Rims for handcarts《手推车的轮圈》.pdf

DIN 7825-1983 Rims for industrial trucks《工业货车的轮圈》.pdf

DIN 7826-1983 Rims for motor vehicles and trailers semi drop center type rim diameter 16 20 and 24《汽车和挂车的轮圈 半凹型 轮圈直径16、20和24》.pdf