SIS 16 22 18-1967 Rubber Determination of the adhesion to tiro metal plates Tensile test《橡胶与金属板附着力的测定 拉伸试验》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JUS C A4 038-1986 Mechanical testing of metals Standardized blocks to be med for Vickers hardness testin machmes (HV 0 2 to HV 100)《金属机械检测 维克斯硬度检测用标准块（HV0 2-HV100）》.pdf

JUS C A4 040-1986 Mechanical testing of metals Hardness test Vickers test (HV 0 2 to less than HV 5)《金属的机械试验 硬度试验 维氏硬度（维氏硬度为0 2－5）》.pdf

JUS C A4 043-1986 Mechanical testing ofmetals Tablesof Vickershardness values HV 0 2 to less than HV 5《金属的机械测试 维氏硬度值表（维氏硬度0 2-5）》.pdf

JUS C A4 050-1986 Mechanical testing of meta s Vickcrs hardness test of hardmetals《金属的机械测试 硬质合金的维氏硬度试验》.pdf

JUS C A4 051-1986 Mechanical testing of metals Determination ofapparent hardness of sintered metalmaterials excluding hardmetals - Materials of essentially uniform section hardness.pdf

JUS C A4 052-1986 Mechanical testing ofmetals Rockvell hardness test of hardmetals (ScaleA)《金属的机械测试 硬质合金洛氏硬度试验（标尺A）》.pdf

JUS C A4 053-1986 Mechanical testing of metals Determination of transverse rupturestrength of hardmetals《金属的机械测试 硬质合金横向断裂强度的测定》.pdf

JUS C A4 055-1987 Mechanical testing of meta s Determination of apparent hardness ofs nteres metal materials excluding hardmeta s Case-hardened ferrous materials surface enriched b.pdf

JUS C A4 058-1990 Metalic pomJers Determination of green strength by traasverse rupture of rectan-gular compacts《金属粉末生坯强度的测定 矩形压坯横向断裂法》.pdf