SIS 16 44 20-1970 Polycarbonate injection moulding and extrusion compounds General information《聚碳酸酯注塑成型和挤出化合物 一般信息》.pdf

相关资源

HG T 3020-1999 聚碳酸酯（PC）模塑和挤塑材料命名.pdf

SJ 50972-3-2002 CLSK235型有可靠性指标的金属化聚碳酸酯薄膜介质直流固定电容器详细规范.pdf

QB 2460-1999 聚碳酸酯（PC）饮用水罐.pdf

HG T 2234-1991 聚碳酸酯稀溶液粘数的测定方法.pdf

HG T 2503-1993 聚碳酸酯树脂.pdf

SN T 1891.8-2007 进出口微波食品包装容器及包装材料卫生标准 第8部分：聚碳酸酯树脂.pdf

QB T 2460-1999 聚碳酸酯(PC)饮用水罐.pdf

SJ 50972-1-1994 有可靠性指标的CLSK28和CLSK29型金属化聚碳酸酯薄膜介质直流固定电容器详细规范.pdf

SJ T 10680-1995 电子设备用固定电容器.第12部分：空白详细规范：金属箔式聚碳酸酯膜介质直流固定电容器.评定水平E.pdf

SJ T 9503.10-1991 金属化聚碳酸酯膜介质直流固定电容器质量分等标准.pdf

猜你喜欢

FORD WSS-M4D932-B1-2017 POLYPROPYLENE (PP) COPOLYMER MEDIUM IMPACT COMPOUND BLOW MOLDED UNDERHOOD TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D932-B2-2014 POLYPROPYLENE (PP) COPOLYMER MEDIUM IMPACT COMPOUND INJECTION MOLDED UNDERHOOD TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4D932-B1).pdf

FORD WSS-M4D932-B2-2016 POLYPROPYLENE (PP) COPOLYMER MEDIUM IMPACT COMPOUND INJECTION MOLDED UNDERHOOD TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4D932-B1).pdf

FORD WSS-M4D932-B2-2017 POLYPROPYLENE (PP) COPOLYMER MEDIUM IMPACT COMPOUND INJECTION MOLDED UNDERHOOD TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4D932-B1).pdf

FORD WSS-M4D933-A1-2006 POLYAMIDE 6 (PA6) IMPACT MODIFIED HEAT STABILIZED EXTRUSION MOLDING COMPOUND TO BE USED WITH WSS-M99P1111-A 《受热稳定的冲击改性聚酰胺6（PA6）挤塑成型料 与标准FORD WSSS-M99P111.pdf

FORD WSS-M4D934-A1-2010 ETHYLENE METHACRYLIC ACID IONOMER (EMA) MODIFIED 3% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用3%玻璃纤维增强的改性.pdf

FORD WSS-M4D934-A2-2010 ETHYLENE METHACRYLIC ACID IONOMER (EMA) MODIFIED 10 % GLASS FIBER REINFORCED MOLDING COMPOUND EXTERIOR TO BE USED WITH FOR WSS-M99P1111-A 《汽车外部用10%玻璃纤维增强的.pdf

FORD WSS-M4D935-A1-2010 POLYBUTYLENE TEREPHTHALATE (PBT) IMPACT MODIFIED MOLDING COMPOUND SE TO BE USED WITH FORD WSS-M99P1111-A 《冲击改性聚对苯二甲酸丁二醇酯（PBT）成型料 SE 与标准FORD WSS-M99P1111-.pdf

FORD WSS-M4D936-A1-2012 POLYPROPYLENE (PP) COPOLYMER 30 % GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚丙烯(PP)共聚物 30%玻璃纤维增强模塑材料 与福特WSS-M99P1111-A.pdf