1、This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 1 of 2 NAVISTAR, INC. Material, Parts, and Process Specifications (
2、MPAPS) NUMBER: MPAPS S-F-96.101-GS/PL Former Designation: ESP-F-96.101-GS TITLE: Felt Washers English Series (Noun Code 3720) CURRENT REV No.: 1506 DATE: June 2015 WRITTEN/EDITED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES: ESP-F-96.101-GS - September 2000 PRINTED COPIES
3、OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may involve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health prac
4、tices and to determine the applicability of regulatory limits prior to use. Change Notice: Changed to New MPAPS format; Combined GS, PP. 1.0 RESTRICTED CHEMICAL SUBSTANCES: Effective January 1, 2007, all product supplied to the requirements of this specification must comply with the requirements of
5、the MPAPS B-50 specification. 2.0 MATERIAL: Washers will be fabricated from materials as specified in SAE J-314. 3.0 TOLERANCES: Inside Diameters A Outside Diameters B 3.125“ to 4.000“ is plus or minus .020“ 4.125“ to and larger is plus or minus .025“ 2.062“ to 3.000“ is plus or minus .015“ 3.125“ t
6、o 4.000“ is plus or minus .020“ 1.062“ to 2.000“ is plus or minus .010“ 2.125“ to 3.000“ is plus or minus .015“ .562“ to 1.000“ is plus or minus .006“ 1.125“ to 2.000“ is plus or minus .010“ .250“ to .500“ is plus or minus .004“ .500“ to 1.000“ is plus or minus .006“ 4.0 POLICY FOR SELECTING PARTS F
7、OR NEW DESIGN: For new design, parts shall be selected from “Approved“ part list only. Incrementation Policy: Inside Diameter = 1/4“ Increments Outside Diameter = 1/8“ Increments 5.0 DEFECTS: Washers will be flat and uniform in roundness, have true walls on ID and OD Surfaces, and be reasonably free
8、 of surface fuzz and packed free from clippings and small pieces. NUMBER: MPAPS S-F-96.101-GS/PL TITLE: Felt Washers REVISION: 1506 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to as
9、sume all patent liability. 2015 by Navistar, Inc. JUNE 2015 Page 2 of 2 6.0 PART LIST: 6.1 Approved: Dimensions in Inches Inside Diameter Outside Diameter Thickness Felt Material Part Number 1.000 1.625 .250 F-6 462800R1 2.375 3.125 .312 F-1 71762R1 7.0 TECHNICAL INFORMATION: For further information
10、 related to the technical content of this specification, contact: Suppliers may purchase controlled copies of this specification by contacting: Materials Engineering and Technology Dept. 10400 W. North Avenue Melrose Park, IL 60160 E-mail: MaterialsEngineeringN IHS Global Inc. 15 Inverness Way East Englewood CO 80112-5776 Phone: 1-800-854-7179 E-mail: AutomotiveIHS.com Website: http:/
