SIS 65 00 62-1962 Textiles Effect of chromium salts on dyeing《纺织品 铬盐染色的影响》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 19045-1980 Triangular throw-away (indexable) carbide cutting inserts with 11 end-clearance angle Design and dimensions《可转位的多面体带厚角的正三棱形硬质合金切削刀片 结构及尺寸》.pdf

GOST 19046-1980 Triangular throw-away (indexable) carbide cutting inserts with cylindrical holes and chip-breaking flutes on one face only Design and dimensions《可转位的多面体带孔和单侧有切屑槽的正三.pdf

GOST 19047-1980 Hexagon throw-away (indexable) carbide cutting inserts with 80 included angle and cylindrical holes Design and dimensions《可转位的多面体带孔和80角的六棱形硬质合金切削刀片 结构及尺寸》.pdf

GOST 19048-1980 Hexagon throw-away (indexable) carbide cutting inserts with 80 included angle with cylindrical holes and chip-breaking flutes Design and dimensions《可转位的多面体成80角的带孔和切.pdf

GOST 19049-1980 Square throw-away (indexable) carbide cutting inserts Design and dimensions《可转位的正方形多面硬质合金切削刀片 结构及尺寸》.pdf

GOST 19050-1980 Square throw-away (indexable) carbide cutting inserts with 11 end-clearance angle Design and dimensions《可转位的带11后角的正方形多面硬质合金切削刀片 结构及尺寸》.pdf

GOST 19051-1980 Square throw-away (indexable) carbide cutting inserts with cylindrical holes Design and dimensions《可转位的带孔多面的正方形硬质合金切削刀片 结构及尺寸》.pdf

GOST 19052-1980 Square throw-away (indexable) carbide inserts with cylindrical holes and chip-breaking flutes on one face only Design and dimensions《可转位的带孔多面和单侧有切屑槽的正方形硬质合金切削刀片 结构及.pdf

GOST 19053-1980 Square throw-away (indexable) carbide cutting inserts with cylindrical holes and secondary edges at cutting points Design and dimensions《可转位的带孔和顶端有斜边的正方形多面硬质合金切削刀片 .pdf