SIS 71 01 05-1950 《罐装 220毫升里脊罐》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NF E24-404-2007 Belt drives - V-ribbed belts - Determination of measurement of pitch angle and cord position 《皮带传动 多楔带 间距、角度和约束位置尺寸的测定》.pdf

NF E25-004-1984 Fasteners Short notations 《紧固件 简单注释》.pdf

NF E25-005-2005 Fasteners - Test methods 《紧固件 试验方法》.pdf

NF E25-007-1982 Fasteners Order and delivery specifications 《紧固件 订货和交付条款》.pdf

NF E25-011-1992 Mechanical properties of fasteners Bolts screws studs and nuts made of non-ferrous metals 《紧固件机械特性 由非亚铁金属制造的螺栓、螺钉、柱螺栓和螺母》.pdf

NF E25-017-2006 Fasteners - Counterbores for bolts and screws - Dimensions 《紧固件 螺栓和螺钉用锪钻 尺寸》.pdf

NF E25-018-1992 Fasteners Countersunk head screws Head configuration and gauging 《紧固件 沉头螺钉 头部的构型和测量》.pdf

NF E25-018-2-1994 Contersunk flat head screws Part 2 penetration depthy of cross recesses 《沉头螺钉 第2部分 十字槽》.pdf

NF E25-021-1994 Cross recesses for screws 《螺钉的十字槽(欧洲标准EN ISO 4757)》.pdf